We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue painted benchtop plate shear with long lever handle and mounting brackets

VEVOR

VEVOR 32" Manual Plate Shear Q235 1.5mm Cutting Capacity

SKU CH-0W7X-S185Q

A 32-inch manual plate shear cuts mild steel, aluminium and coated sheets up to 1.5 mm thick with a T10 blade hardened above 52 HRC and 0.0027-inch clearance for burr-free edges

  • TypeOther Appliances
  • Width9.84
  • Cuts 800 mm length in one pass with 1.5 mm max thickness
  • T10 blade hardened beyond 52 HRC slices mild steel and aluminium cleanly
  • Edge clearance under 0.0027" leaves burr-free cuts on 6 mm Q235 strip
  • 15 lb Q235 frame bolts to floor for stable manual operation
  • 230 mm handle gives strong leverage on 12 mm thick blade

32" Manual Plate Shear for Metalworking

The VEVOR 32" Manual Plate Shear is a benchtop cutting machine designed for processing steel and aluminum sheets. It suits builders, fabricators and DIY enthusiasts who need straight cuts on larger panels without powered equipment. The Q235 steel frame and T10 blade provide the rigidity required for workshop use.

1.5 mm Maximum Thickness on Mild Steel

The shear handles plate up to 1.5 mm thick with a tensile strength of 235 MPa, covering mild steel, aluminum, galvanized and coated sheets. Harder or thicker materials exceed the blade clearance of 0.0027" and the 52 HRC edge hardness, so they cannot be cut cleanly. The 800 mm blade length sets the maximum single-pass cut at 31.5 inches.

Floor Mounting and Clearance Requirements

Operation requires bolting the unit to a stable floor using the supplied brackets and hardware. The assembled footprint measures 1350 x 220 x 1050 mm and weighs 41.8 kg, so verify that your workspace can accommodate the dimensions and support the mass. Ensure sufficient swing room for the 230 mm handle during the cutting stroke.

Highlights

  • Cuts 800 mm length in one pass with 1.5 mm max thickness
  • T10 blade hardened beyond 52 HRC slices mild steel and aluminium cleanly
  • Edge clearance under 0.0027" leaves burr-free cuts on 6 mm Q235 strip
  • 15 lb Q235 frame bolts to floor for stable manual operation
  • 230 mm handle gives strong leverage on 12 mm thick blade

Specifications

TypeOther Appliances
Width9.84

Questions about this item

Should I choose the 32 inch model or a smaller shear for cutting 1.5 mm steel sheets?

The 32 inch blade gives a maximum shearing length of 31.5 inches or 800 mm, so you can cut full-width panels in one pass without repositioning the material.

What does the 1.5 mm cutting capacity mean when I am at the bench?

It means the machine will cleanly shear mild steel up to 0.06 inch thick with a blade clearance under 0.0027 inch, leaving a smooth, burr-free edge on Q235 plate rated at 235 MPa tensile strength.

How does the manual lever and floor-bolt mounting limit what I can cut?

The 9 inch handle provides the leverage needed for 1.5 mm plate, while bolting the 92.15 lb frame to the floor keeps the 53.15 x 8.66 x 41.34 inch unit rigid during each cut.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.