We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel pressure pot with top-mounted manual agitator handle, pressure gauge and regulator knob, 30 litre capacity

VEVOR

VEVOR 30L Air Paint Pressure Pot with Manual Agitator 70PSI

SKU CH-1RJT-1K9GQ

A 30 L stainless-steel pressure pot with manual agitator and adjustable pressure up to 70 psi for continuous spray-gun feeding

  • TypeOther Appliances
  • Width17.72
  • 30 L capacity lets you finish large spray jobs with fewer refills
  • manual agitator handle keeps paint mixed and prevents settling during use
  • adjustable pressure up to 70 psi with gauge for precise control
  • 1/4 in air inlet and 3/8 in fluid outlet connect directly to spray guns
  • stainless steel bucket resists corrosion and includes 10 ml leak repair sealant

30 Litre Spray Paint Pressure Pot

The VEVOR 30 L pressure pot holds eight gallons of coating and connects to a spray gun through a quarter inch air inlet, a three eighths inch fluid outlet and a second quarter inch air outlet. A manual agitator on the lid lets the operator stir material at low speed to prevent settling without introducing air bubbles. The unit ships with a stainless steel inner bucket, a 10 ml leak repair sealant tube and a user manual.

Adjustable Pressure to 70 PSI

A pressure knob on the regulator adjusts tank pressure up to a maximum of 70 psi, while a gauge displays the current reading in real time. The suction tube includes a filter net that traps debris before it reaches the gun, reducing blockages during extended spray sessions. No compressor or power supply specifications are provided, so the installer must match air delivery to the pot’s quarter inch inlet.

Stainless Bucket and Sealant Included

The inner bucket measures 32 by 40 centimetres and sits inside a 80 by 42.5 centimetre outer shell that weighs 24.8 kilograms. Four swivel casters on the base allow the assembly to be rolled around a workshop or job site. The included sealant can address minor leaks at fittings, and the quarter inch and three eighths inch ports accept standard industrial quick connect fittings for rapid setup.

Highlights

  • 30 L capacity lets you finish large spray jobs with fewer refills
  • manual agitator handle keeps paint mixed and prevents settling during use
  • adjustable pressure up to 70 psi with gauge for precise control
  • 1/4 in air inlet and 3/8 in fluid outlet connect directly to spray guns
  • stainless steel bucket resists corrosion and includes 10 ml leak repair sealant

Specifications

TypeOther Appliances
Width17.72

Questions about this item

How do I connect the 1/4 in air inlet and 3/8 in fluid outlet to my compressor and spray gun?

Fit a 1/4 in quick-coupler to the air inlet for the compressor line and a 3/8 in fitting to the fluid outlet for the spray gun hose; tighten both with PTFE tape to stop leaks at 70 psi.

Which parts will need replacement after extended use?

The suction-tube filter net and the lid gasket are the wear items; clean the net after each job and swap the gasket when the 70 psi gauge no longer holds pressure.

What limits continuous spraying at the 70 psi maximum?

The 30 L tank empties after prolonged high-pressure runs, so refill intervals become the practical limit before the agitator handle or pressure knob.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.