We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey painted 3-in-1 sheet metal brake with shear, bend and roll functions, 12 inch capacity, bench mounted

VEVOR

VEVOR 3-in-1 Sheet Metal Brake 12 in 20 GA 90°

SKU CH-FGFP-R5G2H

Combines bending, shearing and rolling for 12 in wide sheet metal up to 20 gauge with a 90° bend angle

  • TypeOther Appliances
  • Width13.78
  • 3-in-1 shear brake roll combines bending shearing and rolling in one unit
  • 12 in 305 mm capacity handles 20 gauge 1 mm thick sheet metal
  • 90° max bending angle with ±1° precision for accurate folds
  • HT200 cast frame with T10 shear blade and 45# tools resists deformation
  • Compact 20.9 x 14.8 x 15 in footprint weighs 90 lb 41 kg

All-in-One Sheet Metal Machine

The VEVOR 3-in-1 combines shearing, bending and rolling in a single bench-top unit. It handles sheet up to 12 in wide and 20 GA thick, with a maximum bending angle of 90°. The design replaces three separate machines for workshop efficiency.

Manual Operation and Build Quality

Hand-lever actuation means no motor noise, no electrical draw and no thermal load during use. The frame uses HT200 casting while the shear blade is hardened T10 steel at 52 HRC. Blade clearance is under .0027 in for clean cuts without burrs.

Sustained Workshop Use

Bending capacity extends to 28 in length, and the slip roll forms cylinders down to 1.8 in diameter. Upper and lower bending tools are 45# steel at 21 HRC, and the roller drum is 1.5 in diameter by 12 in long. The unit weighs 90 lb, so it stays planted during repeated cycles. Not for automated production lines or material thicker than 1 mm.

Highlights

  • 3-in-1 shear brake roll combines bending shearing and rolling in one unit
  • 12 in 305 mm capacity handles 20 gauge 1 mm thick sheet metal
  • 90° max bending angle with ±1° precision for accurate folds
  • HT200 cast frame with T10 shear blade and 45# tools resists deformation
  • Compact 20.9 x 14.8 x 15 in footprint weighs 90 lb 41 kg

Specifications

TypeOther Appliances
Width13.78

Questions about this item

How do I mount the 12 in brake and what step is most often missed?

Bolt the 20.9 x 14.8 x 15 in frame to a bench that can hold 90 lb; the step most often missed is checking blade clearance at 0.0027 in before the first cut.

Which parts wear first and when should I plan to replace them?

The T10 shear blade at 52 HRC and the 45# bending tools at 21 HRC dull with 20 GA work; inspect edges every few hundred cycles and replace when burrs appear.

What limit appears first during a long bending run?

The 90° ± 1° maximum bend angle is reached before the 28 in bending length or 1 mm thickness capacity becomes a constraint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.