We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two red D-ring shackles with black screw pins and washers

VEVOR

VEVOR 3/4" D-Ring Shackle 2 Pack Red 4.75T WLL 28.5T Break Strength

SKU CH-JVGK-Q0FH6

Two alloy-steel D-ring shackles rated 4.75 t WLL and 28.5 t break strength with 7/8 in screw pins for off-road recovery

  • Width5.91
  • 75 tonne working load limit for heavy recovery
  • 5 tonne break strength from #45 steel body
  • 7/8″ 40Cr screw pin with isolators and washers
  • Two shackles weighing 5.51 lbs total in the pack
  • 51 mm inner diameter accepts thick straps and chains

Vehicle recovery shackle kit

This two-pack supplies alloy-steel D-ring shackles rated for a 4.75-tonne working load limit and a 28.5-tonne breaking strength. Each shackle uses a 7/8-inch screw pin with included isolators and washers for secure attachment during off-road recovery.

Suits off-road recovery, not permanent rigging

The shackles are built for Jeep and truck recovery where a 19-millimetre wire diameter and 51-millimetre inner diameter match common recovery points. They are not intended for overhead lifting, permanent structural rigging or applications that require a larger pin or higher working load limit.

4.75-tonne working load limit decides fit

The 9,500-pound work load limit is the single figure that determines whether the shackle matches your recovery strap or winch line rating. Verify that your gear’s rated capacity does not exceed this limit before use.

Highlights

  • 75 tonne working load limit for heavy recovery
  • 5 tonne break strength from #45 steel body
  • 7/8″ 40Cr screw pin with isolators and washers
  • Two shackles weighing 5.51 lbs total in the pack
  • 51 mm inner diameter accepts thick straps and chains

Specifications

Width5.91

Questions about this item

What is the difference between the 4.75T working load limit and the 28.5T break strength?

The 4.75T working load limit is the maximum safe load for regular recovery use. The 28.5T break strength is the force at which the #45 steel D-ring or 40Cr steel pin will permanently deform or fail.

How do the 19 mm wire diameter and 22 mm pin diameter affect real-world recovery?

The 19 mm wire diameter and 22 mm pin diameter provide the cross-sectional area needed to reach the 62832 lbs break strength. They fit standard 3/4 inch recovery points and 7/8 inch pin holes on Jeep and truck bumpers.

What does the 7/8 inch screw pin with isolators and washers cap in practice?

The 7/8 inch (22 mm) 40Cr steel screw pin caps the assembly at the 4.75T working load limit. The included isolators and washers reduce metal-on-metal wear and prevent the pin from backing out under vibration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.