We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A grey upright cabinet on four wheels with hose and blast gun attached

VEVOR

VEVOR 28 Gallon Vacuum Sand Blaster 1200W 60-110 PSI

SKU CH-SQAK-1DQBE

A 28 gallon vacuum sand blaster with a 1200W turbine vacuum system delivering 90% abrasive recovery at 60-110 PSI working pressure

  • TypeOther Appliances
  • Width18.7
  • 90 % abrasive recovery cuts material waste
  • 1200 W turbine vacuum keeps the workshop clean
  • 60–110 PSI working pressure tackles heavy coatings
  • 28 gal tank holds 9.9 gal of abrasive for long runs
  • 4 casters and ergonomic handle move the 61.3 lb unit easily

28 Gallon Vacuum Sand Blaster

The VEVOR 28 gallon vacuum sand blaster combines a 1200 W turbine vacuum with a 60-110 PSI blasting system for automotive and equipment refinishing. Its built-in vacuum captures dust at the nozzle while recycling abrasive at a 90 % recovery rate. The 28 gallon tank holds up to 9.9 gallons of 60-100 grit media. An 8.2 ft hose and four casters let you move around the workpiece.

Suited for metal prep and rust removal; not for wood

This unit targets shops stripping paint, rust or scale from metal frames, panels and machinery where dust containment matters. The dual-lid design with a high-density mesh filter keeps the workspace clean while returning usable abrasive to the tank. Operators who need to blast wood surfaces should choose a different tool because the manufacturer advises against it. Buyers without a compressed-air supply rated for 60-110 PSI will also need another solution.

106 litre tank with 45 litre media capacity

The 106 litre tank provides enough volume for extended blasting sessions before refilling, while the 45 litre suggested abrasive capacity sets the practical media limit. At 60-110 PSI the gun delivers consistent flow through the included nozzle for panel-sized jobs. Continuous heavy-duty use on large structures will eventually exhaust the media supply and require pauses to reload. The 1200 W vacuum motor maintains suction throughout the duty cycle but does not increase blasting pressure beyond the stated range.

Highlights

  • 90 % abrasive recovery cuts material waste
  • 1200 W turbine vacuum keeps the workshop clean
  • 60–110 PSI working pressure tackles heavy coatings
  • 28 gal tank holds 9.9 gal of abrasive for long runs
  • 4 casters and ergonomic handle move the 61.3 lb unit easily

Specifications

TypeOther Appliances
Width18.7

Questions about this item

What air compressor capacity do I need to run the 60-110 PSI blaster?

You need a compressor that can deliver at least 60 PSI and up to 110 PSI continuously; the blaster operates within that pressure range.

Can I reuse my existing 60-100 grit abrasive with the 90% recovery system?

Yes, the built-in vacuum recovers about 90% of used abrasive, so 60-100 grit media can be collected and reused repeatedly.

How do I confirm the vacuum is capturing dust at the 90% recovery rate?

Check that the high-density mesh filter and both lids are sealed, then verify abrasive collects in the tank while minimal dust escapes during blasting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.