We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
VEVOR 200A spool gun, 20ft cable, transparent wire feed, ergonomic grip, 7.6 lbs

VEVOR

VEVOR 200A Spool Gun 20ft Cable Hobart IronMan 240 .030/.035

SKU CH-1W0S-DM2SV

A 200 amp spool gun with a 20 ft cable, compatible with Hobart IronMan 240 welders and .030/.035 flux core, solid or aluminium wires

  • TypeOther Appliances
  • Width13.19
  • Handles .030" and .035" flux core solid aluminum wires
  • Transparent feed window shows wire movement in real time
  • 20 ft cable reaches around large workpieces
  • Light 7.6 lb gun reduces fatigue on long jobs
  • Compatible with Hobart IronMan 240 welder

200A Spool Gun for Hobart IronMan 240

This spool gun is a specialty welding appliance built to mount directly on a Hobart IronMan 240 MIG welder. It accepts 1 lb wire spools and feeds both 0.030-inch and 0.035-inch diameters through a 20 ft cable, allowing operators to run flux-cored, solid, or aluminum wire without changing the main drive system.

Suited for aluminium and thin-sheet work

The gun targets welders who need a dedicated wire feeder for aluminium or thin-gauge steel on the IronMan 240 platform. Its transparent feed window lets the user watch wire movement in real time to reduce bird-nesting, while the 7.6 lb weight and ergonomic grip limit fatigue during long sessions. Shops that require a push-pull system, a longer cable run, or compatibility with any other welder model should look elsewhere.

20 ft cable fixes reach and wire compatibility

The 20 ft cable length determines how far the gun can travel from the power source, and the factory-supplied contact tips cover only the two stated wire sizes of 0.030-inch and 0.035-inch. Verify that both the reach and the wire diameters match the intended application before fitting the gun to the IronMan 240.

Highlights

  • Handles .030" and .035" flux core solid aluminum wires
  • Transparent feed window shows wire movement in real time
  • 20 ft cable reaches around large workpieces
  • Light 7.6 lb gun reduces fatigue on long jobs
  • Compatible with Hobart IronMan 240 welder

Specifications

TypeOther Appliances
Width13.19

Questions about this item

How do I install the 20 ft spool gun on my Hobart IronMan 240, and what step is often missed?

Connect the control cable and gas line to the welder front panel, then secure the 1 lb wire spool inside the transparent housing; the step many miss is selecting the correct .030 or .035 contact tip and drive roll before feeding wire.

What maintenance or replacement parts will the spool gun need over time?

Replace the .030 and .035 contact tips as they wear, clean the transparent wire feed window and drive rolls to prevent debris build-up, and inspect the 20 ft cable sheath for cracks or kinks after heavy use.

What limit appears first when running the gun at 200 amps continuously?

The 200 amp duty cycle of the Hobart IronMan 240 is reached first; the gun itself weighs 7.6 lbs and uses a 20 ft cable, so extended high-amperage welding will trip the welder thermal protection before the gun overheats.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.