We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black steel pallet forks with adjustable stabilizer bar clamp-on design

VEVOR

VEVOR 2000 lbs Clamp-On Pallet Forks 60" Adjustable Stabilizer Bar

SKU CH-JYMP-J7SWW

Clamp-on pallet forks with a 2000 lbs capacity, 43" blades and a stabiliser bar adjustable from 19.5" to 36"

  • TypeOther Appliances
  • 2000 lbs lifting capacity with durable square steel tubing construction
  • Adjustable stabiliser bar spans 19.5 to 36 inches preventing fork separation under load
  • Clamp-on design fits bucket lips 7 inches above and 11 inches below cutting edge
  • 43-inch fork blades at 2 inches high by 2.75 inches wide handle logs, hay bales and debris
  • 65 lbs net weight with reinforced bolts and grooved screw heads for lasting strength

What these pallet forks are for

These clamp-on forks attach to a tractor or skid-steer bucket and are rated for 2000 lbs of lifting capacity. They suit farmers, landscapers and property owners who need to move pallets, logs, hay bales or fence posts without a dedicated fork frame.

Installation and common issues

Slide the forks over the bucket cutting edge and tighten the clamps; the adjustable stabiliser bar locks between 19.5 in and 36 in to keep the tines from spreading under load. The main difficulty is matching the bucket lip dimensions — the top lip must be 7 in, the bottom lip 11 in and the gap 3 in — otherwise the clamps will not seat securely.

Capacity and practical limits

The 43 in fork blades handle standard pallets and bulky items such as firewood or debris up to the 2000 lbs rating. Beyond that weight or with loads wider than the 36 in stabiliser setting the forks can flex or the clamps may lose grip, so heavier or wider jobs need a purpose-built fork frame.

Highlights

  • 2000 lbs lifting capacity with durable square steel tubing construction
  • Adjustable stabiliser bar spans 19.5 to 36 inches preventing fork separation under load
  • Clamp-on design fits bucket lips 7 inches above and 11 inches below cutting edge
  • 43-inch fork blades at 2 inches high by 2.75 inches wide handle logs, hay bales and debris
  • 65 lbs net weight with reinforced bolts and grooved screw heads for lasting strength

Specifications

TypeOther Appliances

Questions about this item

How do I confirm the forks are clamped securely to my bucket after installation?

After sliding the forks over the bucket cutting edge, tighten the reinforced bolts until the 3 in lip gap closes firmly against the bucket lip; the adjustable stabilizer bar should then be set between 19.5 in and 36 in so the 43 in fork blades cannot spread under a 2000 lbs load.

What comes in the package and is any extra hardware required?

The box contains one pallet fork assembly and one manual; all mounting bolts and the adjustable stabilizer bar are built in, so no separate hardware is needed for bucket attachment.

Which stabilizer-bar setting should I choose for my 43 in fork blades?

Set the bar anywhere from 19.5 in up to 36 in; narrower settings give maximum rigidity for heavy pallets, wider settings allow easier entry into tight stacks while still preventing the 2.75 in wide blades from separating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.