We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of silver steel clamp-on pallet forks with rectangular tubes and 30 inch blades

VEVOR

VEVOR 2000 lbs Clamp-On Pallet Forks 43

SKU CH-YEGN-36XB6

Clamp-on pallet forks lift 2000 lbs with 43" overall length and 30" blades for tractor buckets

  • TypeOther Appliances
  • Width12.4
  • 2000 lb lift capacity from square steel tubing construction
  • Reinforced bolts and grooved screw heads for lasting durability
  • Slide over bucket edge and clamp down for quick installation
  • 30 inch fork blades with 2.95 inch bucket lip gap
  • 43 inch overall length weighs 36.4 lbs for easy handling

Clamp-On Pallet Forks 2000 lbs Capacity

These clamp-on pallet forks attach to a tractor or skid-steer bucket without welding. They are built from square steel tubing rated for 2000 lbs and suit farm, landscaping and light construction tasks. Installation is completed by sliding the fork over the bucket edge and tightening the reinforced bolts.

Suits Bucket Lip Gaps Around 3 Inches

The design fits rectangular bucket lips with a 75 mm gap and matching upper and lower tube dimensions. Operators needing a different lip profile, a wider fork spread or a higher lift capacity should consider other attachment styles.

30 Inch Fork Blades Handle Standard Pallets

Each blade measures 30 inches long by 2 inches high and 2.75 inches wide, providing enough reach for typical pallet and bale work. The 2000 lbs rating defines the safe working limit; heavier loads or extended boom positions will exceed the structural capacity.

Highlights

  • 2000 lb lift capacity from square steel tubing construction
  • Reinforced bolts and grooved screw heads for lasting durability
  • Slide over bucket edge and clamp down for quick installation
  • 30 inch fork blades with 2.95 inch bucket lip gap
  • 43 inch overall length weighs 36.4 lbs for easy handling

Specifications

TypeOther Appliances
Width12.4

Questions about this item

What bucket lip thickness does the 3 in gap on these clamp-on pallet forks accommodate?

The 3 in gap fits bucket lips up to 3 in thick, matching the 75 mm rectangular tube opening specified for the clamp mechanism.

Will the 43 in overall length and 2.75 in blade width let me keep using my existing 30 in fork blades for pallet work?

Yes, the 30 in fork blades and 2.75 in width are unchanged, so your current pallet handling workflow stays the same.

How do I confirm the 2000 lbs capacity is holding after I clamp the forks onto my loader bucket?

Check that the reinforced bolts are fully tightened, the forks sit level with no gap movement, and the load lifts cleanly without the clamp shifting on the bucket lip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.