We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black forged-aluminium wheel spacers, 50.8 mm thick, 6-lug pattern, hub-centric 87.1 mm bore

VEVOR

VEVOR 2" 6x5.3" Wheel Spacers 87.1mm Hubcentric M14x2 4pcs Black

SKU CH-B442-47ZW3

Forged 6061-T6 aluminum wheel spacers widen the track by 2 inches with a 6x5.3 bolt pattern and 87.1 mm hub bore for 2003-2015 Ford and Lincoln models

  • TypeOther Appliances
  • Width7.87
  • Widens track by 2 inches for better stability
  • Hubcentric 87.1 mm bore centres wheel precisely
  • Forged 6061-T6 alloy resists wear under load
  • 6x5.3 inch bolt pattern fits Ford and Lincoln models
  • Four spacers included at 50.8 mm thickness each

2-Inch 6-Lug Wheel Spacers

These hubcentric wheel spacers widen the track by two inches using a 6×5.3-inch bolt pattern and an 87.1-millimetre centre bore. They are built for Ford Expedition, F-150 and Lincoln Navigator models from 2003 through 2015.

Bolt-On Installation with 6061-T6 Alloy

Each spacer is forged from 6061-T6 aluminium and ships with M14×2 studs pre-installed. Torque the supplied hardware to the vehicle manufacturer’s specification and re-check after the first 50 miles to avoid loosening.

For 6-Lug Trucks Needing Wider Stance

The kit suits owners correcting offset on compatible Ford and Lincoln trucks. It will not fit 5-lug, 8-lug or metric bolt-pattern vehicles, nor models outside the listed years.

Highlights

  • Widens track by 2 inches for better stability
  • Hubcentric 87.1 mm bore centres wheel precisely
  • Forged 6061-T6 alloy resists wear under load
  • 6x5.3 inch bolt pattern fits Ford and Lincoln models
  • Four spacers included at 50.8 mm thickness each

Specifications

TypeOther Appliances
Width7.87

Questions about this item

How can I confirm the 87.1 mm hubcentric fit is seated correctly after torquing the M14x2 studs?

After installation, verify the spacer sits flush against the hub face with no gap, then torque each M14x2 lug nut to the vehicle manufacturer's specification and re-check torque after the first 50 miles.

The box lists four spacers and a user manual; do I need to buy lug nuts or thread-locking compound separately?

The package includes four 2-inch thick spacers with pre-installed studs and a manual; factory lug nuts are reused, and thread-locking compound is not required but may be applied per the manual's guidance.

My 2014 Ford F-150 has a 6x5.3 bolt pattern — which spacer thickness matches the 50.8 mm spec shown for this kit?

This kit provides a single 50.8 mm (2-inch) thickness across all four spacers, matching the 6x5.3 pattern and 87.1 mm hub bore for 2004-2015 F-150 models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.