We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel submersible sludge pump with float switch and power cord

VEVOR

VEVOR 1HP Submersible Sludge Pump 4020GPH 30FT Lift 26FT Cord

SKU CH-ARF1-W7SAP

Handles solids up to 1.38" with a 1HP motor delivering 67 GPM flow and 30 ft lift, IPX8 rated stainless steel construction, 26 ft cord included

  • TypeOther Appliances
  • Width8.66
  • Handles solids up to 1.38" without clogging
  • 1HP copper motor moves 67GPM for fast drainage
  • IPX8-rated 304 stainless steel resists corrosion
  • 26ft power cord plus automatic float switch
  • 30ft maximum lift clears deep basements or ponds

1 HP Sludge Pump for Basement and Pond

This submersible unit moves up to 4020 gallons per hour with a 30-foot lift height. A 1.38-inch bottom inlet passes solids without clogging. The IPX8-rated 304 stainless steel housing resists corrosion in dirty water. It suits homeowners draining flooded basements, pools, ponds or hot tubs.

Fits Standard Pipework with Included Connectors

The pump runs on 120 V AC at 60 Hz and draws 745 watts. A 26-foot power cord reaches distant outlets. Supplied NPT 3/4-inch, 1-inch and 1.5-inch connectors plus a combined 1-inch, G1 and 1.5-inch adapter let you join common hose or pipe sizes. Automatic float switch starts and stops the motor as water levels change.

Accessories Simplify Installation and Control

Three threaded connectors and one multi-size adapter cover most discharge fittings without extra parts. The float switch removes the need for manual monitoring during operation. A user manual guides wiring and placement. No additional controllers or sensors are bundled.

Highlights

  • Handles solids up to 1.38" without clogging
  • 1HP copper motor moves 67GPM for fast drainage
  • IPX8-rated 304 stainless steel resists corrosion
  • 26ft power cord plus automatic float switch
  • 30ft maximum lift clears deep basements or ponds

Specifications

TypeOther Appliances
Width8.66

Questions about this item

How long can the 1.0 HP motor run continuously before thermal protection trips?

The 745 W copper motor is rated for continuous duty at 120 V 60 Hz; thermal overload will reset automatically once the housing cools.

What sound level and housing temperature should I expect after hours of pumping?

The IPX8-sealed SUS304 shell stays near water temperature while the motor hum stays below typical basement background noise.

Which discharge fittings must I have on site before the pump will connect to my plumbing?

The box includes NPT 3/4", NPT 1", 1.5" male thread and a universal 1"/G1/1.5" adapter for immediate hookup.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.