VEVOR
VEVOR 15 Gallon 2HP 5.3 CFM 125 PSI 78dB Oil-Free Air Compressor
A 15 gallon oil-free compressor delivering 5.3 CFM at 90 PSI with a 78 dB noise level
- TypeOther Appliances
- Width15.35
- 15-gallon steel tank stores ample air for extended pneumatic tasks
- 3 CFM at 90 PSI delivers fast, efficient inflation for tools
- 2 HP oil-free motor runs at 1680 RPM with 1.32 kW power
- 78 dB ultra-quiet operation thanks to built-in silencer system
- Max 125 PSI pressure supports tire inflation, spray painting and auto repair
15 Gallon Oil-Free Compressor
This 15 gallon steel tank compressor delivers 5.3 CFM at 90 PSI with a maximum pressure of 125 PSI. Its 2 HP oil-free motor runs at 1680 RPM and produces 78 dB of noise. The unit operates on either 110V or 220V power. It is built for pneumatic tools such as nail guns, impact wrenches and spray guns.
Upgrades from smaller portable units
A 15 gallon tank holds more air than compact pancake or hot-dog compressors, so the motor cycles less often during sustained spray painting or nailing. The jump is worth it when you run tools that need continuous flow at 5.3 CFM rather than short bursts. Buyers who only inflate tyres occasionally will not need this capacity.
Limits of the 125 PSI single-stage design
Single-stage pumps reach 125 PSI maximum, which suits most automotive and woodworking tools but not high-pressure industrial equipment. The 78 dB rating is quiet for this class yet still requires hearing protection during long sessions. The 110V or 220V supply must match local mains voltage; the compressor cannot run on both simultaneously.
Highlights
- 15-gallon steel tank stores ample air for extended pneumatic tasks
- 3 CFM at 90 PSI delivers fast, efficient inflation for tools
- 2 HP oil-free motor runs at 1680 RPM with 1.32 kW power
- 78 dB ultra-quiet operation thanks to built-in silencer system
- Max 125 PSI pressure supports tire inflation, spray painting and auto repair
Specifications
| Type | Other Appliances |
|---|---|
| Width | 15.35 |
Questions about this item
How much floor space does the 15 gallon steel tank compressor occupy?
The unit measures 28.3 inches long by 15.4 inches wide by 28.0 inches high and weighs 81.57 lbs, so allow at least that footprint plus clearance for the two 6 inch casters and foot pads.
What electrical supply does the 2HP 1.32KW motor require and what is the first connection step?
The motor runs on US standard 110V or EU standard 220V; verify your local voltage matches before plugging the compressor into a grounded outlet rated for the circuit.
When should the two G1/2 plastic shell air filters be inspected or replaced?
Check the intake filters regularly for dust buildup or damage to the high-temperature silicone and stainless steel braided intake pipe; replace them when airflow drops or the filter cotton shows wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



