VEVOR
VEVOR 13500 lb Electric Winch 12V 3/8 in 85 ft Synthetic Rope Wireless Wired Remote IP55
12 V electric winch pulls 13500 lb with 85 ft of 3/8 in synthetic rope and includes wireless plus wired remotes
- Width13.39
- 13500 lb pulling power moves heavy loads
- 12 V 6 HP pure-copper motor delivers strong torque
- 85 ft synthetic rope resists kinks and splinters
- Wireless and wired remotes give flexible control
- IP55 rating protects against dust and water jets
13500 lb Towing Winch for Off-Road Vehicles
This 12V DC electric winch delivers a rated line pull of 13500 lbs using a 6 HP pure copper motor and a 265:1 gear ratio. It comes equipped with 85 ft of 3/8 in synthetic rope, an IP55-rated housing, and both wireless and wired remote controls. The unit suits off-road SUV, Jeep, trailer, and boat recovery tasks.
Sustained Pulling Behaviour with Synthetic Rope
The 6 HP motor drives the 265:1 gearing to maintain pulling force across the full 85 ft rope length. Synthetic rope reduces weight compared to steel cable and stores less kinetic energy during tension. The IP55 enclosure protects the motor and control box from water jets and dust ingress during extended winching sessions in mud, snow, or sand.
Pre-Installation Checks for Your Vehicle
Verify that your mounting plate or bumper accepts the 21 x 6.3 x 8.5 in winch footprint and the supplied bolt pattern. Confirm the 12V electrical system can supply the high amperage draw of a 6 HP motor under load, using the provided 1.8 m negative power cable. Ensure fairlead clearance matches the 3/8 in rope diameter and that the 50.7 lb unit weight is supported.
Highlights
- 13500 lb pulling power moves heavy loads
- 12 V 6 HP pure-copper motor delivers strong torque
- 85 ft synthetic rope resists kinks and splinters
- Wireless and wired remotes give flexible control
- IP55 rating protects against dust and water jets
Specifications
| Width | 13.39 |
|---|
Questions about this item
How much current does the 12 V 6 HP motor draw when the winch runs at full load for long periods?
The 12 V DC 6 HP pure copper motor is rated for 13500 lbs line pull; sustained operation at that load will draw very high amperage and generate significant heat, so ensure the vehicle charging system and wiring can supply the required current continuously.
What mounting hardware and electrical connections must the buyer already have to install this winch?
The package includes a mounting-bolt pack, two mounting hooks, a fairlead, a 1.8 m negative power cable and a control box with cable set; you must provide a suitable mounting plate or bumper, a 12 V power source with heavy-gauge positive cable, circuit breaker or fuse, and a clean chassis ground.
Will the 265:1 gear ratio and IP55-rated housing work reliably on an older 12 V vehicle electrical system?
The 265:1 gear ratio provides high mechanical advantage for the 13500 lbs rating, and the IP55 enclosure resists dust and water jets; however, an aged alternator or undersized battery may struggle to deliver the peak current the 6 HP motor demands under load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



