We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thirteen-piece annular cutter set in a black portable case with handle

VEVOR

VEVOR 13 pc Annular Cutter Set Weldon Shank M2AL HSS 7/16 to 1-1/16 in 2 in Depth 11 Bits 2 Pilot Pins Case

SKU CH-4M35-QD18A

Thirteen-piece Weldon-shank annular cutter set with eleven M2AL HSS bits from 7/16 to 1-1/16 inch, two pilot pins, hex wrench and a portable case for magnetic drills

  • TypeOther Appliances
  • Width9.45
  • Premium M2AL HSS withstands heat and wear for longer tool life
  • Innovative pointed and flat blades balance load for faster, smoother cutting
  • Large circular grooves eject chips efficiently to prevent jams
  • 11 cutters cover 7/16 in to 1-1/16 in diameters at 2 in depth
  • Portable case with foam insert keeps bits secure and organised

13-Piece Annular Cutter Set

This set contains eleven Weldon-shank annular cutters made from M2AL high-speed steel hardened to HRC 62.5–67.5. Cutting diameters range from 7/16" to 1-1/16" with a uniform 2" depth of cut. Two pilot pins, a hex wrench and a portable case complete the 13-piece kit for magnetic-drill users.

Check Weldon Shank Fit

Verify that your magnetic drill press accepts a Weldon shank before ordering. The cutters have a blade length of 3.41" including the shank, so confirm the machine's stroke and chuck clearance can accommodate that length. Ensure the workpiece thickness does not exceed the 2" cutting depth.

Upgrade from Single-Size Bits

Replacing individual cutters with this kit covers the most common hole sizes in one case, reducing change-over time on repetitive jobs. The M2AL steel and chip-ejection grooves extend life over standard HSS bits when drilling structural steel plate. Not suited for diameters outside the 7/16"–1-1/16" range or depths beyond 2".

Highlights

  • Premium M2AL HSS withstands heat and wear for longer tool life
  • Innovative pointed and flat blades balance load for faster, smoother cutting
  • Large circular grooves eject chips efficiently to prevent jams
  • 11 cutters cover 7/16 in to 1-1/16 in diameters at 2 in depth
  • Portable case with foam insert keeps bits secure and organised

Specifications

TypeOther Appliances
Width9.45

Questions about this item

What comes in the 13-piece set and is anything else needed to start drilling?

The set includes 11 annular cutters from 7/16 in to 1-1/16 in, two pilot pins (4.74 mm and 6.35 mm), a hex wrench, a user manual and a carrying case; the cutters have Weldon shanks so they fit directly into a compatible magnetic drill without extra adapters.

How do I decide which cutter diameter to use from the 11 sizes supplied?

Choose the cutter that matches the hole diameter required by the job — the set covers 7/16 in, 1/2 in, 9/16 in, 5/8 in, 11/16 in, 3/4 in, 13/16 in, 7/8 in, 15/16 in, 1 in and 1-1/16 in, all with a 2 in cutting depth.

What does the 2 in cutting depth mean when the bit is in a magnetic drill?

Each cutter can drill through material up to 2 in thick in a single pass; the overall blade length including the Weldon shank is 3.41 in (86.5 mm), so the drill’s stroke must accommodate that length.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.