VEVOR
VEVOR 12V Diaphragm Pump 1.8 GPM 60 PSI 3-Chamber Specialty Appliance
A 12 V diaphragm pump delivers 1.8 GPM at 60 PSI with an adjustable 40–100 PSI switch and 1/2″ MNPT ports
- TypeOther Appliances
- Width6.5
- Steady 1.8 GPM flow at 60 PSI for reliable daily water supply
- Adjustable 40-100 PSI switch activates on demand, tested over 200000 cycles
- Pure copper motor with noise-reducing base runs quietly in living spaces
- CE and ROHS certified with overheat and overload protection for safe operation
- Compact 8.15 x 5.43 x 4.92 in design fits tight RV and marine installations
Pump Purpose
This 12V diaphragm pump supplies pressurised water at 1.8 GPM and 60 PSI for mobile and off-grid installations. It suits RV, yacht, food-truck, camper and marine systems that need reliable on-demand flow from a DC supply.
Build and Connections
The three-chamber design uses a pure copper motor and a noise-reducing base for quiet operation. A 1/2'' MNPT port fits standard plumbing, while the adjustable 40-100 PSI pressure switch activates automatically when a tap opens and stops when it closes, tested to 200000 cycles.
Pre-Install Checks
Verify that your system runs on 12V DC and can supply 60W for the pump. Confirm the 1/2'' MNPT thread matches your existing fittings and that the 207 x 138 x 125 mm footprint fits the mounting location. Ensure the 40-100 PSI adjustment range covers your required pressure.
Highlights
- Steady 1.8 GPM flow at 60 PSI for reliable daily water supply
- Adjustable 40-100 PSI switch activates on demand, tested over 200000 cycles
- Pure copper motor with noise-reducing base runs quietly in living spaces
- CE and ROHS certified with overheat and overload protection for safe operation
- Compact 8.15 x 5.43 x 4.92 in design fits tight RV and marine installations
Specifications
| Type | Other Appliances |
|---|---|
| Width | 6.5 |
Questions about this item
What does the 1/2'' MNPT port mean for plumbing connections?
The 1/2'' MNPT ports have a 20.955 mm outer diameter and use National Pipe Taper threads for a sealed fit with matching fittings.
Will the 8.15 x 5.43 x 4.92 inch body fit my RV compartment?
The pump measures 207 x 138 x 125 mm and weighs 1.75 kg, so verify your mounting space against those dimensions.
How do I wire the 12 V DC pump and set the pressure switch?
Connect the pump to a fused 12 V DC supply, then adjust the switch between 40 and 100 PSI; the factory setting is 60 PSI.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



