We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver drain cleaner unit with coiled cables and cutters on wheeled frame

VEVOR

VEVOR 120FT x 7/8 Inch Drain Cleaner Machine 420W Manual Feed Specialty Appliance

SKU CH-SKP1-TYW9S

Electric sewer auger with 420W motor, manual feed, CW/CCW control, two steel cables (120' x 7/8" and 18' x 3/8") and six cutters for 1.9" to 6" pipes

  • TypeOther Appliances
  • Width21.06
  • Clears pipes up to 6 inches with 120-foot hardened steel cable
  • 420-watt motor delivers high-speed torque for fast clog removal
  • Manual feed control lets you adjust speed and force precisely
  • Six quick-change cutters handle toilets, sinks and floor drains
  • Forward and reverse rotation simplifies cable management in tight bends

Drain Cleaner Machine for 1.9 to 6-Inch Pipes

This VEVOR drain cleaner machine uses a 420W motor and two hardened 65Mn steel cables to clear blockages in pipes from 1.9 to 6 inches. It comes with six quick-change cutters, gloves and installation tools for residential, office and public-space maintenance. Manual feed control lets the operator adjust speed and force during each job.

420W Motor with Manual Feed and CW/CCW Control

The 420W motor runs at high speed while the manual feeding system gives the operator direct control over cable advance and retreat. A forward-reverse switch changes rotation direction instantly, reducing binding and helping the cable negotiate bends without excessive force or noise.

Six Cutters, Two Cables and Safety Accessories

Six interchangeable cutters adapt the auger to different obstruction types, from soft debris to roots. The 120 FT x 7/8 inch main cable and 18 FT x 3/8 inch secondary cable cover long runs and tight branches. Included gloves, hex wrench and installation tool support safe handling and quick cutter changes.

Highlights

  • Clears pipes up to 6 inches with 120-foot hardened steel cable
  • 420-watt motor delivers high-speed torque for fast clog removal
  • Manual feed control lets you adjust speed and force precisely
  • Six quick-change cutters handle toilets, sinks and floor drains
  • Forward and reverse rotation simplifies cable management in tight bends

Specifications

TypeOther Appliances
Width21.06

Questions about this item

How do I install the 120 ft x 7/8 inch cable and what step is often missed?

Feed the 65Mn steel cable through the guide tube, attach the chosen cutter with the hex wrench, then tighten the drum lock before powering the 420W motor — skipping the lock lets the cable spin loose.

What maintenance will the 120 ft x 7/8 inch and 18 ft x 3/8 inch cables need later?

Rinse both 65Mn cables after each use, coat them with light oil to stop corrosion, inspect for kinks or broken strands, and replace any cutter that shows dull or chipped edges.

What limit appears first during a long run on a 6 inch cast-iron line?

The 420W motor overheats before the 120 ft cable reaches its end, so pause every 15 minutes to let the windings cool or the thermal cut-out will stop the job.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.