We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red hydraulic telescopic transmission jack on four swivel wheels with adjustable saddle and foot pedal

VEVOR

VEVOR 1100REDJACK 1100 lbs Hydraulic Telescopic Transmission Jack

SKU CH-V1E4-A7TEK MPN 1100REDJACK

Hydraulic telescopic jack lifts transmissions up to 1100 lbs with a 33.5 to 67 inch range, 360-degree swivel saddle and foot-pedal operation

  • TypeOther
  • Supports 1100 lbs load capacity for heavy transmissions
  • Two-stage lift range 33.5" to 67" fits varied vehicle heights
  • 360° swivel saddle and 30° tilt simplify alignment
  • Four 360° swivel wheels enable easy shop positioning
  • Sturdy steel frame weighs 95.9 lb for stable operation

VEVOR 1100 lbs Telescopic Transmission Jack

The VEVOR 1100REDJACK is a hydraulic floor jack stand rated for 1100 lbs capacity. It uses a two-stage telescopic cylinder to reach a lift range of 33-1/2" to 67". The fully adjustable saddle rotates 360 degrees and tilts 30 degrees for precise alignment. Four swivel wheels and a foot-pedal pump allow one-person operation in a garage or shop.

Check Floor Space And Load Weight Before Buying

The unit measures 33.5" long by 25.6" wide by 33.5" high and weighs 95.9 lb. Verify your workspace can accommodate this footprint and that the transmission or component does not exceed the 1110 lbs load limit. Ensure the 60 cm safety chain can reach a secure anchor point on the load. Buyers needing a higher capacity or a lower collapsed height should consider other equipment.

Foot Pedal And Swivel Wheels Improve Workflow

The integrated foot pedal leaves both hands free to guide the transmission onto the 13.8" by 9.8" saddle. The 360-degree swivel wheels let you roll the jack into position without lifting the 43.5 kg frame. The 30-degree saddle tilt helps match angled bell housings without extra shims. No additional accessories or software are included.

Highlights

  • Supports 1100 lbs load capacity for heavy transmissions
  • Two-stage lift range 33.5" to 67" fits varied vehicle heights
  • 360° swivel saddle and 30° tilt simplify alignment
  • Four 360° swivel wheels enable easy shop positioning
  • Sturdy steel frame weighs 95.9 lb for stable operation

Specifications

TypeOther

Questions about this item

What comes in the box and what must I source separately for the VEVOR 1100REDJACK transmission jack?

The jack ships as a complete unit with its steel frame, hydraulic cylinder, 360-degree swivel saddle, safety chain and four caster wheels. No extra components are required for basic operation.

The specs list 1100 lbs and 1110 lbs capacity — which figure should I use when choosing this jack?

Both ratings refer to the same 1/2-ton limit; 1100 lbs is the rounded marketing figure and 1110 lbs is the exact tested capacity. Treat 1110 lbs as the maximum safe load.

How does the 33-1/2 to 67 inch lift range work on a real transmission job?

The two-stage telescopic cylinder raises the saddle from 33.5 inches to 67 inches, covering most under-car transmission removal heights without needing blocks or adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.