We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange hydraulic telescopic transmission jack on four swivel wheels, two-stage steel frame with foot pedal and adjustable saddle

VEVOR

VEVOR 1100ORANGEJACK 1100 lbs Hydraulic Telescopic Transmission Jack

SKU CH-7YQR-1KD3A MPN 1100ORANGEJACK

Hydraulic telescopic transmission jack lifts 1100 lbs from 33.5 to 67 inches with 360-degree saddle rotation and 30-degree tilt

  • TypeOther
  • 1100 lb capacity handles heavy transmissions
  • 5" to 67" lift range fits varied vehicle heights
  • 360° saddle rotation plus 30° tilt eases alignment
  • Four 360° swivel wheels move the jack around the shop
  • Steel frame and 60 cm safety chain secure the load

VEVOR 1100 lbs Hydraulic Transmission Jack

The VEVOR 1100ORANGEJACK is a hydraulic telescopic transmission jack rated for 1100 lbs capacity. It features a two-stage lift range from 33-1/2" to 67" and a fully adjustable saddle with 360-degree rotation and 30-degree tilt. A foot pedal operates the hydraulic system while four 360-degree swivel wheels allow easy positioning under the vehicle. The steel frame weighs 95.9 lb and includes a safety chain measuring 23-3/5" long.

Suits transmission removal on passenger cars

This jack suits workshops removing transmissions up to 1100 lbs where a low 33-1/2" collapsed height fits beneath the vehicle. The adjustable saddle and tilt help align awkward gearbox shapes. Buyers needing higher capacity for heavy-duty truck transmissions or a lower minimum height for sports cars should look at other equipment. The 67" maximum extension may limit use on tall lift installations.

1100 lbs load capacity decides fit

The single specification that determines whether this jack fits the job is the 1100 lbs load capacity. Match this figure against the weight of the transmission assembly being lifted. If the component exceeds 1100 lbs, the jack cannot be used safely. The 33-1/2" to 67" lift range and 13.8" x 9.8" saddle dimensions are secondary checks after capacity is confirmed.

Highlights

  • 1100 lb capacity handles heavy transmissions
  • 5" to 67" lift range fits varied vehicle heights
  • 360° saddle rotation plus 30° tilt eases alignment
  • Four 360° swivel wheels move the jack around the shop
  • Steel frame and 60 cm safety chain secure the load

Specifications

TypeOther

Questions about this item

How do I install the 1100 lbs hydraulic telescopic transmission jack, and what step is often missed?

Position the jack on level ground, lock the 360 swivel wheels, attach the safety chain of 23-3/5" length, then adjust the fully adjustable saddle tilt up to 30 degrees before lifting; the missed step is securing the chain to the transmission.

What maintenance will the 1100ORANGEJACK need over time?

Check hydraulic fluid level and top up if the 2-stage lift range of 33-1/2" to 67" slows; inspect the steel frame, 360 swivel wheels and safety chain for wear, and lubricate the saddle rotation mechanism periodically.

What limit appears first when the jack is used continuously at full 1100 lbs capacity?

The hydraulic pump heat buildup limits sustained cycles; the 2-stage cylinder reaches its 67" maximum extension, and the foot pedal effort increases as fluid temperature rises during repeated lifts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.