We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC duct cover kit with ten straight sections, bends, wall guards and fixings, assembled length 5400 mm

VEVOR

VEVOR 1100061670 Mini Split Line Set Cover 3-inch W 17.7Ft L

SKU CH-ZGQB-1JM1Z MPN 1100061670

A PVC cover kit protects 3.0 × 2.4 in mini-split refrigerant lines over 17.7 ft with ten straight ducts, bends, wall guards and all mounting hardware

  • TypeOther Appliances
  • Width7.87
  • Conceals refrigerant lines cleanly with 17.7 ft total assembled length
  • Includes ten straight ducts plus bends and wall guards for complete routing
  • Paintable white PVC surface matches any exterior or interior finish
  • Supplied hardware kit provides 30 short screws, 19 long screws and 22 cable ties
  • Lightweight 9.9 lb assembly simplifies single-person installation on heat-pump systems

Mini Split Line Set Cover

The VEVOR 1100061670 is a PVC decorative pipe cover designed to protect and conceal refrigerant lines for mini split air conditioners and heat pumps. It suits installers and homeowners who want a clean, paintable finish on exposed pipework.

Installation and Common Issues

The kit includes 10 straight ducts each 17.4 in long plus swivel joint, straight pipe joints, bends, wall penetration guards and all screws and cable ties needed for assembly. Total assembled length reaches 213.0 in. Installers should note the 3.0 x 2.4 in pipe opening; lines larger than this will not fit and the cover cannot be resized.

Critical Specification

The 3.0 x 2.4 in pipe opening size is the single dimension that decides compatibility. Measure your line set insulation diameter before purchase; if it exceeds this opening the cover will not close properly and an alternative solution is required.

Highlights

  • Conceals refrigerant lines cleanly with 17.7 ft total assembled length
  • Includes ten straight ducts plus bends and wall guards for complete routing
  • Paintable white PVC surface matches any exterior or interior finish
  • Supplied hardware kit provides 30 short screws, 19 long screws and 22 cable ties
  • Lightweight 9.9 lb assembly simplifies single-person installation on heat-pump systems

Specifications

TypeOther Appliances
Width7.87

Questions about this item

How can I verify the line set cover is correctly assembled and aligned after installation?

Confirm the assembled run reaches 213.0 in total length, each straight section measures 17.4 in, and the pipe opening stays at 3.0 x 2.4 in throughout the route.

Which components are included in the package and what must be purchased separately?

The box contains 10 straight pipes, 1 swivel joint, 9 straight pipe joints, 1 pipe end cap, 1 horizontal bend, 1 vertical bend, 2 wall penetration guards, 30 ST 3.5 x 16 screws, 19 ST4 x 25 screws, 22 cable ties and a user manual; no extra parts are required for a standard installation.

Which size should I choose for a 3-inch wide line set?

This model 1100061670 provides a 3.0 x 2.4 in pipe opening and 17.7 ft total coverage, matching a 3-inch wide line set.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.