VEVOR
VEVOR 10FT Climbing Dome with Hammock and Swing
A 10 ft galvanised-steel dome holds a swing and detachable hammock for up to five children aged three to ten
- TypeOther Appliances
- Supports multiple children with a 750 lbs load capacity
- Galvanized steel frame resists rust and wear for outdoor durability
- Includes swing and detachable hammock for climbing, swinging and resting
- 10 ft diameter fits 4 to 5 kids aged 3 to 10 years
- Simple assembly with supplied Allen keys, wrench and gloves
Geometric Dome Climber for Ages 3 to 10
The VEVOR 10FT geometric dome climber is built from galvanised steel with a colourful powder coating and black PP mesh. It supports a maximum load of 750 lbs for up to five children aged three to ten. The set includes a swing and a detachable cushion that works as a hammock or ground pad. Assembly uses the supplied Allen keys and hex nut wrench.
Suits Families Wanting Multi-Activity Play.
This structure fits large families, kindergartens or playgrounds needing climbing, swinging and resting in one frame. Buyers with limited garden space should look elsewhere because the dome measures 120 x 120 x 60 in. The net weight of 80 lbs means it stays in place once built.
750 lbs Maximum Load Decides Suitability
The 750 lbs / 340 kg rating determines how many children can play together safely. If your group exceeds this limit or includes older users, the dome is not appropriate. Check the weight requirement before purchase.
Highlights
- Supports multiple children with a 750 lbs load capacity
- Galvanized steel frame resists rust and wear for outdoor durability
- Includes swing and detachable hammock for climbing, swinging and resting
- 10 ft diameter fits 4 to 5 kids aged 3 to 10 years
- Simple assembly with supplied Allen keys, wrench and gloves
Specifications
| Type | Other Appliances |
|---|
Questions about this item
How much level ground space does the 120 x 120 in footprint need?
The dome occupies a 120 x 120 in (305 x 305 cm) square and stands 60 in (152.5 cm) high, so clear a flat area at least that large with extra room around the edges for safe access.
Which tools in the box are used for the hex nuts, and what is the common tightening mistake?
Use the supplied #J hex nut wrench for the nuts and the two #I Allen keys for the bolts; the step most people rush is fully tightening every nut only after all pieces are loosely fitted and the frame is square.
What parts of the 80 lb (36.3 kg) structure should be checked each season?
Inspect the galvanized steel tubes and powder-coated joints for rust or chipped coating, check the black PP mesh hammock and swing seat for tears, and verify that all hex nuts and bolts remain snug.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Electric Fly Swatter Rechargeable 2 Pack 2 in 1 Bug Zapper Racket USB-C Charging Stand
- Plastic



