We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled red solar extension cable 100 ft 10AWG IP67 waterproof

VEVOR

VEVOR 100FT 10AWG Solar Extension Cable Red IP67 1500V 30A

SKU CH-K93H-JHBJC

A 100 ft, 10 AWG solar extension cable rated for 1500 V DC and 30 A with IP67 waterproof protection

  • TypeOther Appliances
  • Width7.87
  • Efficient power transfer with 100% tinned copper 10AWG conductor
  • 100 ft length gives flexible routing for RV, boat or roof arrays
  • IP67 rating blocks water and dust in outdoor conditions
  • Rated for 1500 V DC and 30 A continuous current
  • XLPE insulation withstands -40 °C to 105 °C extremes

100FT 10AWG Solar Extension Cable

The VEVOR 100FT 10AWG Solar Extension Cable in Red is a specialty appliance designed for photovoltaic systems. It uses 100% tinned copper conductors to provide excellent electrical conductivity and low resistance. The cable carries TÜV certification and meets international standards for high-efficiency solar setups. It suits home, RV, boat, and off-grid installations needing long, reliable runs.

DIY solar installers needing IP67 durability

This cable suits DIY solar installers who need a 100 ft / 30.48 m single-wire run rated for harsh outdoor exposure. The IP67 protection rating ensures reliable operation against rain, dust, and dirt across an operating range of -40221 / -40105. Builders requiring pre-assembled connector pairs or a different wire gauge should look at other products. The 5.67 lbs / 2.57 kg weight reflects the substantial copper core.

DC 1500V 30A rated single-wire specification

The deciding specification is the DC 1500V rated voltage combined with a 30A rated current capacity on a 10AWG / 6mm² single conductor. This rating determines whether the cable matches your array voltage and current requirements. The XLPE insulation and tinned copper construction support this performance envelope. Verify your system parameters against these figures before purchase.

Highlights

  • Efficient power transfer with 100% tinned copper 10AWG conductor
  • 100 ft length gives flexible routing for RV, boat or roof arrays
  • IP67 rating blocks water and dust in outdoor conditions
  • Rated for 1500 V DC and 30 A continuous current
  • XLPE insulation withstands -40 °C to 105 °C extremes

Specifications

TypeOther Appliances
Width7.87

Questions about this item

How much voltage drop should I expect on the 100 ft 10AWG run at 30 A?

The 100 ft 10AWG tinned-copper cable is rated for 30 A at 1500 V DC; voltage drop depends on your exact load and temperature, so calculate using the 6 mm² cross-section and 30.48 m length.

Does the IP67 jacket stay flexible and cool when the cable carries 30 A all day in direct sun?

The XLPE insulation is rated from -40 °C to 105 °C and the IP67 seal resists water and dust, so the jacket remains flexible and handles continuous 30 A operation without overheating.

What connectors do I need on my panels and charge controller to use this red 10AWG extension?

The cable is supplied as a single 10AWG wire with no connectors fitted; you must provide matching MC4 or compatible plugs rated for 1500 V DC and 30 A to terminate both ends.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.