We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver winch housing with black steel rope wound on drum, wired and wireless remotes shown alongside

VEVOR

VEVOR 10000 lbs Electric Winch 12V DC Steel Rope 65 ft Wireless Wired Remote IP55

SKU CH-Z1VY-RQT56

12 V DC electric winch pulls 10000 lbs with 65 ft steel rope, wireless and wired remotes, IP55 rating

  • Width9.84
  • 10000 lbs pulling power for heavy recovery tasks
  • 65 ft steel rope reaches distant anchor points
  • Wireless and wired remotes give flexible control options
  • IP55 rating protects motor from dust and water jets
  • 3 HP pure copper motor delivers reliable torque

10000 lbs 12V DC Winch

The VEVOR electric winch delivers a rated line pull of 10000 lbs using a 12V DC 3 HP pure copper motor and a 265:1 gear ratio. It is built for towing SUVs, Jeeps, trailers and boats in off-road conditions. The 65 ft steel rope with a 21/64 in diameter is wound on a drum housed in an aluminum alloy, steel and plastic body rated IP55 for water resistance.

Wireless and wired remote setup

Two control modes are supplied: a wireless remote and a wired remote connected to the included control box with cable set. Mounting bolts, a fairlead, a 3/8 clevis hook, a red strap and two mounting hooks are also in the package. The control box adds to the overall dimensions of 21.2 x 6.3 x 11 in, so verify the mounting surface accommodates this footprint before drilling. The unit weighs 64.4 lbs and may require two people to position safely.

Pre-installation checks for 12V systems

Confirm the vehicle electrical system is 12V DC and that the battery and alternator can supply the high current draw of a 3 HP motor under load. Ensure the chosen mounting location on the trailer, Jeep or SUV frame is flat, reinforced and aligned with the fairlead to prevent rope damage. The IP55 rating protects against dust and water jets but not submersion, so avoid mounting points exposed to deep water crossings.

Highlights

  • 10000 lbs pulling power for heavy recovery tasks
  • 65 ft steel rope reaches distant anchor points
  • Wireless and wired remotes give flexible control options
  • IP55 rating protects motor from dust and water jets
  • 3 HP pure copper motor delivers reliable torque

Specifications

Width9.84

Questions about this item

How do I confirm the 10000 lbs electric winch is operating correctly after installation?

Apply a light load and verify the 12V DC 3 HP motor runs smoothly through the 265:1 gear ratio while the 21/64 in x 65 ft steel rope spools evenly on the drum.

What components come in the box and which items must be purchased separately?

The package includes the winch with control box and cable set, wireless remote, wired remote, fairlead, 3/8 clevis hook, red strap, two mounting hooks, mounting bolts and user manual. A 12V power source and mounting plate are not included.

Which rope specification should I choose for this 10000 lbs winch model?

This model is supplied with a 21/64 in diameter steel wire rope measuring 65 ft in length; no alternative rope options are offered for this configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.