VEVOR
VEVOR 10 lb CO2 Tank AA6061 Aluminum CGA320 Valve
A lightweight 10 lb AA6061 aluminium cylinder rated to 1800 PSI working pressure, CGA320 valve, ships empty for food-grade CO2 dispensing
- TypeOther Appliances
- Width8.27
- Lightweight AA6061 aluminium cylinder weighs only 15.87 lbs
- Holds 10 lbs of food-grade CO2 at 99.95 % purity
- CGA320 brass valve rated to 1800 PSI working pressure
- Hydro-tested to 3000 PSI for safety compliance
- DOT approved for draft beer dispensing and soda makers
Compact CO2 cylinder for home dispensing
The VEVOR tank holds 10 lbs of food-grade CO2 and ships empty for local filling. It targets homebrewers, soda makers and draft-beer enthusiasts who want a reusable cylinder that meets DOT requirements and E290 purity standards. The CGA320 valve fits standard North American regulators used on kegerators and carbonation rigs. Buyers needing a larger-capacity vessel or a different valve thread will need another solution.
Rated 1800 PSI working pressure with 3000 PSI test
The AA6061 aluminum body weighs 15.87 lbs empty and measures 6.89 by 6.89 by 20.67 inches. Operating at up to 1800 PSI, the cylinder is hydrostatically tested to 3000 PSI for safety margin. Aluminum construction runs cooler to the touch than steel during rapid discharge, and the brass valve with aluminium handwheel operates without audible leakage under normal serving pressure.
Light grey spray coating resists corrosion
The 175 mm diameter body carries a light grey spray coating that protects the aluminium from wear and moisture in damp cellar or bar environments. A black aluminium handwheel and brass CGA320 valve complete the assembly, and two sealing washers are included for regulator connection. The 525 mm height fits most upright kegerator bays, while the 7.2 kg empty weight allows one-person handling during refill trips.
Highlights
- Lightweight AA6061 aluminium cylinder weighs only 15.87 lbs
- Holds 10 lbs of food-grade CO2 at 99.95 % purity
- CGA320 brass valve rated to 1800 PSI working pressure
- Hydro-tested to 3000 PSI for safety compliance
- DOT approved for draft beer dispensing and soda makers
Specifications
| Type | Other Appliances |
|---|---|
| Width | 8.27 |
Questions about this item
How do I install the CGA320 valve onto my regulator, and which step do people often get wrong?
Screw the CGA320 valve onto the regulator using one of the two supplied sealing washers; the step people miss is placing the washer inside the nut before tightening, otherwise the joint leaks.
What maintenance or replacement will the AA6061 aluminium cylinder need later?
The cylinder requires hydrostatic re-testing every five years; the brass valve and aluminium handwheel can stay in service unless they show damage or wear.
What limit appears first during sustained dispensing at the 1800 PSI working pressure?
The 10 lb CO2 capacity runs out after roughly 10 to 12 small kegs, well before the 3000 PSI test pressure or the 1800 PSI working pressure become limiting factors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
