We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black powder-coated steel hydraulic reservoir rectangular box with gauge and breather cap

VEVOR

VEVOR 10 Gal Hydraulic Fluid Tank Steel Reservoir

SKU CH-Z7S9-16PM6

A 10-gallon cold-rolled steel hydraulic reservoir with oil level gauge, filter breather, and NPT ports for tractors and trucks

  • Width15.16
  • Weld-less cold-rolled steel body with phosphate interior resists corrosion
  • 10-gallon capacity supplies sufficient hydraulic fluid for large machinery
  • Oil level gauge and return filter enable accurate monitoring and fast stable flow
  • Breather cap filters impurities while preventing leakage during operation
  • 2-inch NPT inlet plus 3/4-inch and 1-1/2-inch NPT outlets simplify plumbing

10 Gallon Hydraulic Steel Reservoir

This 10 gallon hydraulic reservoir is built from high-strength cold-rolled steel with a black powder-coated exterior and phosphate-coated interior for corrosion resistance. It includes an oil level gauge, return filter, breather cap with filter, and mounting brackets. The unit suits tractors, trucks and other large mechanical vehicles needing bulk fluid storage.

Replaces Damaged or Undersized Tanks

The reservoir upgrades cracked, corroded or too-small factory tanks that leak or cannot meet fluid volume demands. The jump is worth it when the original reservoir shows seepage at welds, the gauge is unreadable, or the breather no longer keeps contaminants out. The 37.8 litre capacity covers extended service intervals on heavy equipment.

NPT Port Limits and Mounting Constraints

The tank uses a 2 inch NPT inlet and two outlets at 1-1/2 inch and 3/4 inch NPT, so all plumbing must match those thread sizes. Overall dimensions are 50 by 30 by 26 centimetres, and the 15.16 width figure determines clearances between frame rails or body panels. No other port sizes or adapter kits are included.

Highlights

  • Weld-less cold-rolled steel body with phosphate interior resists corrosion
  • 10-gallon capacity supplies sufficient hydraulic fluid for large machinery
  • Oil level gauge and return filter enable accurate monitoring and fast stable flow
  • Breather cap filters impurities while preventing leakage during operation
  • 2-inch NPT inlet plus 3/4-inch and 1-1/2-inch NPT outlets simplify plumbing

Specifications

Width15.16

Questions about this item

What mounting width does the 15.16 inch tank need on a tractor frame?

The tank measures 19.9 inches long, 11.7 inches wide and 10.3 inches high, so the mounting surface must accommodate at least the 11.7 inch width and 19.9 inch length.

Which NPT ports must be sealed during installation to avoid leaks?

Connect the 2 inch NPT inlet, the 1-1/2 inch NPT outlet and the 3/4 inch NPT outlet with matching fittings; the breather cap and oil level gauge thread into their dedicated openings and must be tightened before pressurising the system.

When should the return filter element and breather cap be replaced?

Replace the return filter element when the pressure differential across it reaches the manufacturer's service limit, and swap the breather cap if the filter media is clogged or the seal is damaged.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.