VEVOR
VEVOR 1/2" x 8' Steel Core Flipline Arborist Flip Line
An 8 ft steel-core flipline with 25 kN breaking strength, alloy steel snap hook, aluminium alloy carabiner and tool lanyard for arborist climbing
- TypeOther Appliances
- Width14.17
- Confident climbing at height with 8 ft steel-core flipline rated 25 kN breaking strength
- Superior cut and wear resistance from 7×19 stainless steel wire core inside polyester sheath
- Extra tool lanyard included to secure tools and reduce drop risk while working
- Lightweight 1.7 kg design with storage bag for easy transport and organisation
- High-strength alloy hardware rated 23 kN carabiner and snap hook for reliable fall protection
Secure 8 ft Steel-Core Flipline for Tree Climbing
The VEVOR steel-core flipline measures 8 ft with a 0.5 in diameter and a 25 kN breaking strength that meets ANSI requirements for fall protection. A 7×19 stainless steel wire core inside high-strength polyester fibers gives the line rigidity for stable flipping and resistance to cuts and wear. Alloy steel snap hook and aluminum alloy carabiner each carry a 23 kN rating, while the rope grab handles 15 kN. The complete kit includes a tool lanyard, storage bag and manual.
Replaces Worn or Non-Compliant Climbing Lines
Swap out an older flip line when its sheath shows abrasion, the core has kinks or the hardware no longer meets the 23 kN connector rating required by current work-at-height rules. The 25 kN line strength and certified hardware make the jump worthwhile for arborists who need documented compliance and a stiffer line that eases upward movement on the trunk. The integrated tool lanyard also removes the need for a separate tether, reducing snag points on the harness.
Check Harness Attachment Points
Verify that your harness bridge or D-ring accepts a carabiner rated to 23 kN and that the snap hook gate opens wide enough for your anchor points. Confirm the rope grab you use is rated for at least 15 kN and operates smoothly on a 12.7 mm diameter line. The 3.75 lb total weight and 2.4 m packed length should fit your existing gear bag, and the manual details inspection intervals you must follow before each climb.
Highlights
- Confident climbing at height with 8 ft steel-core flipline rated 25 kN breaking strength
- Superior cut and wear resistance from 7×19 stainless steel wire core inside polyester sheath
- Extra tool lanyard included to secure tools and reduce drop risk while working
- Lightweight 1.7 kg design with storage bag for easy transport and organisation
- High-strength alloy hardware rated 23 kN carabiner and snap hook for reliable fall protection
Specifications
| Type | Other Appliances |
|---|---|
| Width | 14.17 |
Questions about this item
What diameter snap hook or carabiner gate will accept the .5 in diameter steel-core flipline?
The flipline is .5 in thick, so any ANSI-rated snap hook or carabiner with a gate opening of at least 12.7 mm will accept it. The included alloy-steel snap hook and aluminum alloy carabiner are both rated at 23 KN.
How do I attach the flipline to my harness without cross-loading the 23 KN carabiner?
Open the aluminum alloy carabiner gate, clip it into the harness tie-in point, then let the gate snap shut. Verify the gate is fully closed and the load pulls along the spine, not across the gate.
When should I retire the flipline based on the 15 KN rope-grab rating?
Retire the line if the polyester sheath shows cuts, abrasion exposing the 7x19 stainless steel core, or if the rope grab slips below its 15 KN rating during inspection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YINGHUA
YINGHUA 30A 2-channel relay module optocoupler 5V high low trigger
$10.99
0.00013207BTC
In stock