VEVOR 0809-27 Gutter Brush 27 Pack 80ft 4.33in Diameter

Gutter Brush for 5-Inch Gutters

This 27-pack of gutter brushes provides 80 feet of total coverage for standard 5-inch gutters. Each brush has a 4.33-inch diameter designed to fit securely inside the gutter channel. The system is intended for homeowners who want to prevent leaves, pine needles, and acorns from clogging drainage without climbing onto the roof. Installation is performed from ground level by sliding sections into place.

Ground-Level Installation Limits

The brushes install without tools by sliding one end into the existing gutter run. This method restricts use to gutter profiles that accept a 4.33-inch diameter cylinder and are accessible from a ladder or extension pole. The polypropylene bristles and galvanized steel wire core sit loose in the channel, so they cannot seal against fascia gaps or handle roof valleys where debris accumulates differently. Heavy snow or ice loads may compress the bristles and reduce water passage.

Debris Capacity and Flow Headroom

Medium-density bristles allow water to flow through while trapping leaves and needles on top. The 80-foot length covers continuous runs on typical residential rooflines, and the 8.8-pound total weight keeps individual sections light enough for one-person handling. The brushes fill up over time and require periodic removal and shaking to clear accumulated debris. They do not capture fine sediment or shingle grit that washes through the bristle matrix.