Verilux BRT-ST5050USB 20ft RGB LED Strip 5V USB 300 LEDs IR Remote Dimmable
A 20-foot RGB LED strip with 300 SMD 5050 LEDs, USB 5 V power, IR remote dimming from 1 % to 100 %, and adhesive backing for indoor accent lighting
- lamp typeLED
- lamp wattage7.5W
- voltage5 volts_of_direct_current
- switch typeremote
- lamp quantity300
- shade dimensions6000 mm x 10 mm x 1 mm
- Safe 5 V USB power runs cool and stays touch-safe for children
- 20 ft length with 300 high-brightness 5050 LEDs covers large indoor areas
- IR remote gives full RGB colour choice plus 1 %–100 % dimming
- Strong adhesive backing on 16 strips enables quick peel-and-stick installation
- Lightweight 130 g design plugs into any USB port for portable accent lighting
20 ft USB LED strip for accent lighting
This 20-foot RGB strip runs on 5 V USB power and includes 300 5050 SMD LEDs. The self-adhesive backing attaches to clean indoor surfaces such as cabinets, shelves or behind a monitor. An IR remote provides on/off, colour selection and 1 % to 100 % dimming. The low-voltage design stays cool to the touch.
Replaces fixed single-colour under-cabinet fixtures
Swapping a static warm-white bar for this strip adds full RGB mixing and remote dimming without new wiring. The upgrade is worthwhile when you want programmable colour scenes for movies, parties or mood lighting while keeping the existing USB outlet or power bank.
Handles ambient backlight and decorative runs
At 7.5 W the strip comfortably illuminates a 20-foot linear run for bias lighting, stair accents or wedding décor. It runs out of reach for high-output task lighting, outdoor exposure or installations longer than the supplied 6 000 mm length without additional segments and power injection.
Highlights
- Safe 5 V USB power runs cool and stays touch-safe for children
- 20 ft length with 300 high-brightness 5050 LEDs covers large indoor areas
- IR remote gives full RGB colour choice plus 1 %–100 % dimming
- Strong adhesive backing on 16 strips enables quick peel-and-stick installation
- Lightweight 130 g design plugs into any USB port for portable accent lighting
Specifications
| Brand | Verilux |
|---|---|
| lamp type | LED |
| lamp wattage | 7.5W |
| voltage | 5 volts_of_direct_current |
| switch type | remote |
| lamp quantity | 300 |
| shade dimensions | 6000 mm x 10 mm x 1 mm |
| shade material | Plastic |
| location/usage | Indoor |
| energy efficient | LED |
| Part Number | BRT-ST5050USB |
| finish | Orange |
| style | Modern |
| material | Plastic |
| weight | 130 grams |
| type | LED |
| size dimensions | 6000 mm x 10 mm x 1 mm |
| width diameter | 6000 L x 10 W x 1 H millimeters |
| depth extension | 6000 L x 10 W x 1 H millimeters |
| base dimensions | 6000 mm x 10 mm x 1 mm |
| wire length | 20 feet |
Questions about this item
How much clearance do I need for the 10 mm wide, 1 mm thick strip and its adhesive back?
The strip measures 10 mm wide by 1 mm thick; allow a few extra millimetres for the adhesive layer and the USB connector at the power end.
What is the step people miss when installing the 16 LED strips with the IR remote?
Point the remote at the receiver on the control box and remove the plastic battery tab before testing; the IR signal will not pass through cabinets or around corners.
Which part of the 20 ft kit will need replacement first?
The IR remote uses one included lithium metal battery; when range drops, replace it with the same coin-cell type.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Scosche
Scosche 8" PRO Midbass Driver 200W RMS 400W Peak 60-8000Hz 97dB 4Ω 3.75" Depth
$9.99
0.00011978BTC
In stock