VERICOM
VERICOM XPS06-00534 C13 cord 6ft 18AWG 125V 10A
A 6 ft C13 to NEMA 5-15P power cord rated 125 V, 10 A with 18 AWG wiring for PCs and monitors
- TypeCable
- 6 ft length reduces cable clutter on the desk
- 18 AWG conductors carry 10 A at 125 V safely
- C13 to NEMA 5-15P fits most PCs and monitors
- UL listed and RoHS compliant for regulated environments
- 250 W rating supports standard desktop power supplies
C13 to NEMA 5-15P Power Cord
This 1.8 metre computer power cord carries a C13 female connector to a standard three-prong NEMA 5-15P plug. It is rated for 125 V and 10 A with 18 AWG conductors. The cable suits most desktop PCs, monitors, printers and similar office equipment that use a C13 inlet.
Suits standard office gear.
It fits devices that accept a non-locking C13 connection and draw within the 10 A limit. Buyers whose equipment needs a locking C13 inlet or a higher amperage rating should look at a different cord. The six-foot length works well for typical desk or rack placements.
18 AWG conductor gauge
The 18 AWG wiring sets the safe current capacity at 10 A for 125 V operation. Verify that the connected device does not exceed this rating before use. The cord is UL listed and RoHS compliant for regulated environments.
Highlights
- 6 ft length reduces cable clutter on the desk
- 18 AWG conductors carry 10 A at 125 V safely
- C13 to NEMA 5-15P fits most PCs and monitors
- UL listed and RoHS compliant for regulated environments
- 250 W rating supports standard desktop power supplies
Specifications
| Brand | Vericom |
|---|---|
| Type | Cable |
Questions about this item
Which devices can I plug this C13 cord into using its NEMA 5-15P male plug?
The NEMA 5-15P male plug fits standard North American 125 V wall outlets and most UPS units, so any device with a C13 inlet — desktop PC, monitor, printer — can be powered from those sources.
Will the 18 AWG conductors safely run a legacy monitor that draws close to the 10 A rating?
At 18 AWG the cord is rated for 10 A at 125 V, matching the 1250 W limit, so a legacy monitor drawing up to 10 A is within specification.
How can I confirm the cord is delivering power correctly after I connect it?
The attached equipment powers on normally and the cord remains cool to the touch during operation, indicating the 18 AWG wiring and C13 connection are functioning as intended.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



