We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black wireless video transmitter and receiver kit with V-mount transmitter and SDI/HDMI outputs

Vaxis Storm

Vaxis Storm Atom 600 KV Wireless TX/RX Kit for RED KOMODO, Black

SKU CH-8E5R-H67S8

Wirelessly transmits 1080p60 video up to 600 feet with under 80 ms latency and multicast to three iOS devices

  • Wireless video up to 600 ft line-of-sight
  • Under 80 ms latency for real-time monitoring
  • Multicast to three iOS devices via Vaxis Vision app
  • Transmitter powers through V-Mount battery plate
  • Receiver runs on USB or L-Series battery

RED KOMODO Wireless Kit

The Vaxis Storm Atom 600 KV kit pairs a transmitter built for the RED KOMODO with a separate ATOM 500 SDI receiver. It is aimed at camera operators and DITs who need untethered monitoring on set or in the field.

Multicast Monitoring Adds Flexibility

The transmitter sends a line-of-sight signal up to 600 feet at 1080p60 with less than 80 ms latency. It also multicasts video over Wi-Fi to three iOS devices running the Vaxis Vision app, giving the director and clients simultaneous wireless monitoring.

Mounts Directly on Camera Power

The transmitter locks onto a dual V-mount battery plate and passes battery power through to the KOMODO, reducing cable count. The receiver runs from USB or an L-series plate. OLED menus and a switchable cooling fan simplify setup, though line-of-sight obstructions will reduce the 600-foot range.

Highlights

  • Wireless video up to 600 ft line-of-sight
  • Under 80 ms latency for real-time monitoring
  • Multicast to three iOS devices via Vaxis Vision app
  • Transmitter powers through V-Mount battery plate
  • Receiver runs on USB or L-Series battery

Specifications

No published specifications for this item yet.

Questions about this item

Does the transmitter's V-Mount plate need periodic servicing to keep passing battery power to the RED KOMODO?

The V-Mount plate on the transmitter is a passive mechanical interface; no scheduled maintenance is required beyond keeping the contacts clean and checking that the locking lever secures the battery firmly.

What resolution ceiling stops the link from going higher than 1080p60 during a long shoot?

The kit's video pipeline is capped at 1080p60, so that resolution and frame-rate limit is reached before any bandwidth or thermal constraint appears.

How loud does the smart cooling fan get when the transmitter runs all day on a V-Mount battery?

The fan can be switched off for silent operation; with it on, airflow noise stays low enough for typical on-set use, and the OLED display lets you toggle it instantly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.