We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Vantrue hardwire kit with three fuse leads and a Type-C plug, 14.8ft cable for dash cam power

Vantrue

Vantrue 3-Lead ACC Hardwire Kit 12V-24V Type-C 14.8ft for N4 N4 Pro N5 S1P E1 E2 E3 N2S

SKU CH-2E0C-5ZSKF

A 14.8 ft Type-C hardwire kit with adjustable low-voltage cut-offs from 11.6 V to 24.5 V, timer settings up to 24 hours and ACC-triggered parking mode for 12 V–24 V vehicles

  • ColorBlack
  • TypeDash Cams
  • Prevents battery drain with adjustable low-voltage cut-off at 11.6V to 24.5V
  • Enables timed parking recording for 2 to 24 hours after ignition off
  • Switches automatically to parking mode when ACC power is lost
  • Powers dash cams directly from 12 V or 24 V vehicle systems
  • 8 ft Type-C cable frees the cigarette lighter for other devices

12V-24V Hardwire Kit for Vantrue Dash Cams

This 14.8ft Type-C hardwire kit supplies continuous power to compatible Vantrue dash cams from a 12V or 24V vehicle electrical system. It supports the N4, N4 Pro, N5, S1P, E1, E2, E3 and N2S models, freeing the cigarette-lighter socket for other devices. The three-lead design includes ACC, constant and ground connections for parking-mode operation.

Installation requires fuse-box access

The kit includes fuse holders for the constant and ACC leads; you must tap an appropriate constant circuit and an ignition-switched circuit, then route the 14.8ft cable to the camera mount. A common issue is selecting a fuse slot that loses power with the ignition off, which prevents parking mode from activating. The Type-C connector fits only the listed Vantrue models; it will not work with other Vantrue dash cams or non-Type-C devices.

Parking mode limited by battery-voltage thresholds

Low-voltage protection offers eight cut-off values ranging from 11.6V to 24.5V; once the vehicle battery drops below the chosen threshold, power to the camera is cut to preserve starting ability. A programmable timer can also end recording after 2, 4, 6, 12 or 24 hours, or run indefinitely until the voltage threshold is reached. Both limits mean extended unattended recording depends on battery health and the selected protection level.

Highlights

  • Prevents battery drain with adjustable low-voltage cut-off at 11.6V to 24.5V
  • Enables timed parking recording for 2 to 24 hours after ignition off
  • Switches automatically to parking mode when ACC power is lost
  • Powers dash cams directly from 12 V or 24 V vehicle systems
  • 8 ft Type-C cable frees the cigarette lighter for other devices

Specifications

ColorBlack
TypeDash Cams

Questions about this item

How do I confirm the low-voltage protection is active after installation?

The kit shuts off power when battery voltage falls below your chosen threshold — 11.6V, 11.9V, 12.2V or 12.5V for 12V systems, 23.6V, 23.9V, 24.2V or 24.5V for 24V systems — so the dash cam stops recording instead of draining the battery.

What comes in the box and what must I buy separately?

The hardwire kit includes the 14.8ft Type-C cable with built-in fuse holders for 12V-24V vehicles; you only need a compatible Vantrue dash cam such as N4, N4 Pro, N5, S1P, E1, E2, E3 or N2S — no extra adapters are required.

Which low-voltage setting should I choose for my 12V car?

For a 12V vehicle select one of the four 12V thresholds — 11.6V, 11.9V, 12.2V or 12.5V — matching the level at which you want the kit to cut power and protect the starter battery.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.