We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10ft USB-C OBD hardwire cable with LED voltage display

Vantrue

Vantrue 10ft Type C USB OBD Hardwire Power Cable with LED Screen

SKU CH-QXN7-DP80R

A 10 ft USB-C OBD hardwire cable powers compatible dash cams for 24/7 parking surveillance with adjustable low-voltage cut-off and an LED voltage display

  • ColorBlack
  • TypeDash Cams
  • Continuous parking surveillance via direct battery connection
  • Adjustable low-voltage cutoff protects battery from drain
  • Real-time voltage monitoring on built-in LED display
  • USB-C plug fits multiple Vantrue dash cam models
  • 10 ft cable length simplifies OBD port routing

Purpose and Compatibility

This 10ft Type C USB OBD hardwire power cable enables 24/7 parking surveillance by connecting compatible dash cams directly to the vehicle battery. It suits owners of listed Vantrue models such as N4 Pro, N5, N4, S1 Pro, N2X, E1, E1 Lite, E2, E3 and E360 who need continuous power while parked.

Accessories and Voltage Control

The built-in LED digital display shows real-time battery voltage and the selected cut-off threshold, letting you monitor electrical health at a glance. Three gear-shifting options (11.6V/12V/12.4V for 12V systems and 23.6V/24V/24.4V for 24V systems) adjust the low-voltage protection point to match your battery type.

Interface and Installation Limits

The cable requires a Type C USB port on the dash cam and an accessible OBD-II socket for power, so it cannot be used with cameras that only accept barrel or Micro-USB connectors. Vehicles without a standard OBD-II port or with the port in a location that blocks the 10ft cable run are not supported.

Highlights

  • Continuous parking surveillance via direct battery connection
  • Adjustable low-voltage cutoff protects battery from drain
  • Real-time voltage monitoring on built-in LED display
  • USB-C plug fits multiple Vantrue dash cam models
  • 10 ft cable length simplifies OBD port routing

Specifications

ColorBlack
TypeDash Cams

Questions about this item

Will the fuse in the OBD connector need periodic replacement?

The cable plugs directly into the OBD port without an in-line fuse, so no fuse replacement is required.

Which low-voltage threshold will cut power first during extended parking mode?

The lowest selectable threshold is 11.6 V for 12 V systems or 23.6 V for 24 V systems, and power cuts when battery voltage drops below the chosen value.

Does the LED screen add noticeable heat or power draw when the cable runs continuously?

The LED display only shows real-time and set voltage; it draws minimal current and generates no measurable heat during all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.