VANGUARD
VANGUARD Veo 2 Pro 263AV 11 lb aluminum tripod with PH-15 video head
Three-section aluminum tripod folds to 23.2 inches, extends to 59 inches, and supports 11 pounds with a smooth 360-degree fluid video head
- Stable shots from robust 26 mm aluminum legs and secure locks
- Cinematic pans via ultra-smooth 2-way fluid video head
- Flexible framing from 23.2" folded to 59" extended height
- Holds cameras up to 11 lb with 5 kg rated capacity
- Lightweight 4.6 lb kit includes Arca quick shoe with safety pin
VANGUARD Veo 2 Pro 263AV Tripod Kit
This three-section aluminum tripod pairs with the VEO 2 PH-15 fluid video head to give photographers and videographers a stable platform for cameras or spotting scopes. It supports equipment weighing up to 11 pounds while weighing only 4.6 pounds itself. The 26 mm diameter legs lock at 20, 45 and 80 degree angles for low-angle or eye-level shooting. A low-angle adapter is included for ground-level perspectives.
Thermals Noise and Power Draw
As a purely mechanical support system the tripod generates no heat, consumes no electricity and operates in complete silence. The fluid head provides smooth pan and tilt resistance without any motor or electronic damping. No batteries or power cables are required for any function. Performance is unaffected by ambient temperature within normal outdoor ranges.
Build Integration and Clearance
The tripod folds to 23.2 inches for transport and extends to 59 inches working height. An Arca-type quick shoe with a safety pin secures the camera or scope and prevents accidental release. The head rotates 360 degrees on its pan axis for full horizontal coverage. Leg angle selectors and the short centre column adapter allow the system to fit tight spaces or uneven terrain.
Highlights
- Stable shots from robust 26 mm aluminum legs and secure locks
- Cinematic pans via ultra-smooth 2-way fluid video head
- Flexible framing from 23.2" folded to 59" extended height
- Holds cameras up to 11 lb with 5 kg rated capacity
- Lightweight 4.6 lb kit includes Arca quick shoe with safety pin
Specifications
No published specifications for this item yet.
Questions about this item
How do I set the 26 mm legs to the 20, 45 or 80 degree angles and what step is often missed?
Press the easy-release buttons to unlock each leg, pull it out to the desired angle until it clicks into one of the three detents, then press the button again to lock; the step many skip is confirming the second click so the leg cannot collapse under load.
Which parts of the PH-15 head and Arca-type shoe will need periodic attention or replacement?
The fluid cartridges inside the magnesium-alloy pan head can thicken over time and may require professional re-greasing, while the quick-shoe safety pin and its spring should be inspected for wear and replaced if they no longer engage positively.
At what load does the 11 lb capacity limit first affect smooth pan-and-tilt operation during long takes?
As the combined camera and lens weight approaches the 11 lb maximum, the fluid resistance in the 2-way head increases noticeably, making very slow, steady pans harder to control without jerky starts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



