We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal gas lift cylinder for table-height barstool, non-rotating, 24 to 33 inches

Vandue Corporation

Vandue Corporation table-height non-rotating gas lift 24 33

SKU CH-TQ80-0CFTP

Adjustable gas lift raises table-height surfaces from 24 to 33 inches without rotation

  • TypeBarstool
  • ColorSilver
  • FinishSilver
  • MaterialSee Description
  • StyleModern
  • Assembly RequiredNo
  • Adjustable height from 24 1/4" to 33 1/4" for table use
  • Non-rotating mechanism locks stool in place during height changes
  • Tested to 100,000 operations for long-term reliability
  • No assembly required — ready to install immediately
  • Universal 1 7/8" diameter fits most modern bar tables

Replacement Gas Lift Cylinder

This Vandue Corporation gas lift replaces the height-adjustment cylinder in compatible bar tables. It is the longer table-height version that adjusts from 24 1/4 inches to 33 1/4 inches and locks against rotation. The unit is tested to 100 000 operations and ships new with a five-year manufacturer warranty. Assembly is not required.

Suitable For Fixed-Position Seating

The non-rotating design suits tables or stools that must stay aligned with a counter or work surface. Buyers who need a standard barstool lift adjustable from 20 inches to 28 inches or a rotating mechanism should select a different model. This cylinder weighs 3.2 kg and has a 1 7/8 inch diameter.

Critical Fit Specification

The single specification that decides fit is the adjustable height range of 24 1/4 inches to 33 1/4 inches combined with the non-rotating lock. Verify your table or stool requires this exact stroke and locking behaviour before ordering.

Highlights

  • Adjustable height from 24 1/4" to 33 1/4" for table use
  • Non-rotating mechanism locks stool in place during height changes
  • Tested to 100,000 operations for long-term reliability
  • No assembly required — ready to install immediately
  • Universal 1 7/8" diameter fits most modern bar tables

Specifications

BrandModern Home
Part NumberBARSTOOLGASLIFT-TABLENR
TypeBarstool
ColorSilver
FinishSilver
MaterialSee Description
StyleModern
Assembly RequiredNo
Weight3.2000
Color/FinishSilver

Questions about this item

How do I install the table-height non-rotating gas lift and what step do people often miss?

Remove the old cylinder from the seat base and column, slide the new 24 1/4"–33 1/4" lift into the base taper, then press the seat column down firmly until it locks; the step most often missed is fully seating the column so the non-rotating key engages.

What maintenance or replacement will this gas lift need later?

The cylinder is sealed and maintenance-free; after roughly 100 000 height adjustments the internal seals can wear, at which point the entire lift is replaced as a unit.

What limit appears first under sustained use of the table-height non-rotating gas lift?

The 100 000-cycle endurance rating is the first hard limit; beyond that the seal integrity and consistent height-holding force are no longer guaranteed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.