Vanco
Vanco CAT61WH 1' .3 meter Cat6 network ethernet cable white
A 1-foot Cat6 patch cable with stranded UTP construction rated at 500 MHz for high-speed Internet, DSL, cable modem and fast Ethernet links
- 1 ft length suits tight runs behind desks
- Cat6 rated 500 MHz supports high-speed DSL and cable links
- Stranded UTP with snagless molded boots resists kinks and latch breakage
- 100 % tested and ETL verified to EIA/TIA-568 A/B
- UL listed for safe permanent installation
Quick 1-foot Cat6 patch cable
The Vanco CAT61WH is a 1 foot 0.3 meter Cat6 Ethernet cable built for high speed Internet, DSL or cable modem links and fast Ethernet home networking. It connects a computer to a DSL or cable modem, a networking router, hub or wall plate. Stranded UTP construction and CAT6 approved RJ45 plugs keep the link reliable for everyday desktop or patch panel use.
Certified 500 MHz bandwidth
The cable is rated at 500 MHz and 100 percent tested to meet EIA TIA 568 A B wiring standards. ETL verification and UL listing confirm the build quality for normal indoor runs. Zero clearance molded boots with snagless strain relief protect the connectors during repeated insertion and removal. No active components mean silent operation and zero power draw.
Molded snagless boots simplify installs
White jacket and protective boots make the cable easy to identify and route in tight spaces without catching on adjacent cords. The snagless strain relief preserves the plug latch over many connect and disconnect cycles. Buyers who need longer runs or shielded cable for noisy environments should select a different length or construction.
Highlights
- 1 ft length suits tight runs behind desks
- Cat6 rated 500 MHz supports high-speed DSL and cable links
- Stranded UTP with snagless molded boots resists kinks and latch breakage
- 100 % tested and ETL verified to EIA/TIA-568 A/B
- UL listed for safe permanent installation
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 1' .3 meter Cat6 cable with the zero clearance protective molded boot and snagless strain relief ends?
Align the RJ45 plug with the port, push straight in until the snagless tab clicks, and avoid bending the cable sharply at the boot because the zero clearance design leaves no extra room for leverage.
What maintenance or replacement will the stranded UTP Cat6 cable rated at 500 MHz need later?
Inspect the RJ45 plugs and snagless tabs periodically; replace the cable if the latch breaks, the jacket shows kinks, or certification testing fails after repeated reconnections.
What limit appears first when running sustained high-speed traffic through the ETL-verified, UL-listed Cat6 link?
The 500 MHz bandwidth ceiling and 100-meter channel limit defined by the EIA/TIA 568 standard will constrain throughput before the cable itself degrades.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



