Value Brand
Value Brand ZORO SELECT 2RZE7 Caster Wheel 1200 lb 6 D x 2 In
Supports up to 1200 lb with a 6 in polyurethane wheel on an aluminum core, roller bearing and included spanner bushing for 1/2 in axle
- TypeWheelbarrows & Carts
- Supports heavy loads with 1200 lb rating
- Polyurethane tread resists wear at 98 Shore A hardness
- Roller bearing enables smooth wheel rotation
- Aluminium core keeps wheel lightweight yet strong
- Spanner bushing included for secure axle fit
ZORO SELECT Caster Wheel 1200 lb
This caster wheel supports a 1200 lb load rating and fits wheelbarrows or carts that need a 6 in diameter by 2 in wide wheel. The polyurethane tread on an aluminium core uses a roller bearing for rotation. A 1/2 in axle size and included spanner bushing complete the mounting hardware.
Build quality and daily use
The wheel carries a 98 Shore A hardness rating for firm rolling resistance on hard surfaces. Polyurethane material resists abrasion but is not non-marking, so it may leave traces on finished floors. The 2 7/16 in hub length and standard tread shape suit typical cart axles without modification.
Deciding specification
The 1200 lb load rating is the single figure that determines whether this wheel matches the cart or wheelbarrow you are repairing. Buyers who need a higher capacity or a different axle diameter must select another model. California Proposition 65 warnings apply to this product.
Highlights
- Supports heavy loads with 1200 lb rating
- Polyurethane tread resists wear at 98 Shore A hardness
- Roller bearing enables smooth wheel rotation
- Aluminium core keeps wheel lightweight yet strong
- Spanner bushing included for secure axle fit
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What load rating does the 6 in wheel support?
The wheel is rated for 1,200 lb and falls in the 1,000 to 2,999 lb range.
What axle size and hub length does this caster require?
It fits a 1/2 in axle and has a 2 7/16 in hub length with a spanner bushing included.
How is the wheel mounted on the axle?
Slide the included spanner bushing onto the 1/2 in axle, then press the wheel into place so the 2 7/16 in hub seats fully.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
