We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver flexible hose 20 in long with brass fittings at each end

Value Brand

Value Brand Water Connector 3/8 in 125 psi 20 in

SKU CH-QG3V-XXF8H

Connects 3/8 in hose to 1/2 in FIP with brass fittings, PVC tube and 304 stainless steel cover rated to 125 psi

  • 3/8 in hose diameter fits standard plumbing connections
  • 20 in length provides flexible reach for tight installations
  • 125 psi working pressure handles demanding water supply tasks
  • 304 stainless steel cover resists corrosion for long service life
  • Brass compression and FIP fittings ensure secure leak-free seals

Water Connector for Automotive Plumbing

This 20 in water connector fits automotive and tool plumbing systems that require a 3/8 in hose inside diameter. It connects a 3/8 in compression fitting to a 1/2 in FIP fitting using brass components. The assembly is built for new installations where a flexible link between dissimilar thread types is needed.

125 psi Working Pressure at 70 F

The single specification that determines suitability is the maximum working pressure of 125 psi measured at 70 F. Systems that operate above this pressure or at significantly higher temperatures must use a different connector. The 304 stainless steel cover and PVC tube meet IAPMO and NSF61 standards for potable water contact.

Sustained Pressure and Temperature Performance

Under continuous load the hose handles temperatures from 40 to 180 Degrees F while maintaining its 125 psi rating at the reference temperature. The 2 3/8 in bend radius allows routing without kinking that could restrict flow over long runs. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • 3/8 in hose diameter fits standard plumbing connections
  • 20 in length provides flexible reach for tight installations
  • 125 psi working pressure handles demanding water supply tasks
  • 304 stainless steel cover resists corrosion for long service life
  • Brass compression and FIP fittings ensure secure leak-free seals

Specifications

BrandZORO SELECT

Questions about this item

What does the 125 psi working pressure mean when the connector is installed in a real plumbing system?

The 125 psi rating is the maximum working pressure at 70 F, so the connector can handle typical household supply pressure without bursting as long as the system pressure stays below that limit.

Which connection standards apply to the brass fittings and what do they cap in practice?

The fittings use a 3/8 in F compression end and a 1/2 in FIP end, both made of brass, and the assembly meets IAPMO and NSF61 standards for potable water use.

What physical space and bend allowance does the 20 in hose need to fit and mount properly?

The hose is 20 in long with a 2 3/8 in bend radius, so you need at least that much clearance to route it without kinking the PVC tube inside the 304 stainless steel cover.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.