Value Brand
Value Brand Terminal Strip 4 Pole 2 Row 20 A 300 V 12 AWG Screw
Four-pole, two-row barrier terminal strip rated 20 A at 300 V for 12 AWG screw connections
- Engine BrandZORO SELECT
- Four-pole, two-row layout distributes power cleanly
- 20 A rating handles solid current loads
- 300 V AC rating suits industrial circuits
- Accepts 22–12 AWG wire for flexible installs
- Phenolic housing resists heat and tracking
Terminal Strip for Power Distribution
This four-pole, two-row terminal strip provides secure screw connections for power distribution blocks. It accepts wire sizes from 22 AWG up to 12 AWG and carries a maximum current of 20 A at 300 V. The phenolic housing measures 2.56 in long by 1.12 in wide by 0.59 in high.
Suited for Standard Wiring Tasks
Installers running control circuits or lighting feeds within the 20 A rating will find the screw terminals straightforward. The strip is not intended for applications that require higher current, higher voltage or a protective cover over the connections.
Simple Screw-Terminal Installation
Wires insert into the barrier-style openings and tighten with a screwdriver; no special tools are needed. The main issue is over-tightening the screws, which can crack the phenolic housing, so apply only enough torque to secure the conductor.
Highlights
- Four-pole, two-row layout distributes power cleanly
- 20 A rating handles solid current loads
- 300 V AC rating suits industrial circuits
- Accepts 22–12 AWG wire for flexible installs
- Phenolic housing resists heat and tracking
Specifications
| Engine Brand | ZORO SELECT |
|---|
Questions about this item
What wire gauges do I need to connect to the 12 AWG maximum terminals?
The strip accepts wire from 22 AWG up to 12 AWG, so prepare stranded or solid conductors within that range for each of the four poles.
Will the 0.59 in high housing clear the 1.12 in wide components already in my panel?
At 0.59 in tall and 1.12 in wide the block fits in standard low-profile enclosures, leaving room beside taller relays or breakers.
How can I confirm the 20 A rating is holding after wiring?
With power applied, measure voltage drop across each screw terminal; a minimal drop under load indicates the 20 A connection is sound.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
