Value Brand
Value Brand Terminal Strip 20 Pole 2 Row 30 A 600 V 10 AWG Screw
20-pole dual-row terminal strip rated 30 A at 600 V for 10–22 AWG screw connections
- Engine BrandZORO SELECT
- Handles up to 30 A for reliable power distribution
- Accepts wire from 22 to 10 AWG for flexible installations
- Rated 600 V AC for high-voltage industrial use
- 20 poles across 2 rows maximise connection density
- Phenolic housing resists heat and electrical tracking
20-pole 2-row terminal strip
This 20-pole, 2-row barrier terminal strip handles up to 30 A at 600 V. It accepts wire from 22 AWG to 10 AWG and uses screw terminals for secure connections. The phenolic housing measures 12.35 in long, 1.36 in wide and 0.81 in high. No cover is included with the unit.
Screw-terminal installation notes
Screw terminals allow straightforward wiring with basic hand tools; strip each conductor to the length recommended for the connector. Over-tightening can crack the phenolic housing, so apply only enough torque to hold the wire firmly. Ensure the centre spacing of 9/16 in matches your layout before mounting the strip.
Suited for power distribution blocks
This strip suits installers building or servicing power distribution blocks that require a 20-pole, 2-row barrier format rated for 30 A. Buyers who need a protective cover, a different pole count, or a higher current rating should look at alternative terminal strips. The black phenolic housing is fixed and cannot be changed.
Highlights
- Handles up to 30 A for reliable power distribution
- Accepts wire from 22 to 10 AWG for flexible installations
- Rated 600 V AC for high-voltage industrial use
- 20 poles across 2 rows maximise connection density
- Phenolic housing resists heat and electrical tracking
Specifications
| Engine Brand | ZORO SELECT |
|---|
Questions about this item
How can I verify the 30 A terminal strip is working correctly after wiring?
After installation, confirm each of the 20 screw terminals is tight, then measure continuity across the two rows and check that the 600 V rating matches your circuit requirements.
What components are included with the 20-pole barrier strip and what must be sourced separately?
The strip itself, a black phenolic housing measuring 12.35 in long by 1.36 in wide by 0.81 in high, is supplied; wire from 22 AWG to 10 AWG and a cover are not included.
Which version of the ZORO SELECT terminal strip should I choose for a 30 A, 600 V application?
Select the 20-pole, 2-row model rated 30 A at 600 V with 9/16 in centre spacing that accepts 10 AWG maximum wire.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
