Value Brand
Value Brand Temperature Limit Controller Manual Reset Opens 200°F
A manual-reset temperature limit controller that opens at 200°F for flame-rollout protection on 120V or 277V AC circuits
- Manual reset prevents automatic restart after overheating
- Opens at 200°F to cut power when temperature exceeds limit
- SPST contact form provides simple on/off switching
- Rated for 120V AC and 277V AC input voltage
- Surface mount design allows direct installation on equipment
Application and reset type
This temperature limit controller is designed for flame rollout protection in HVAC equipment. The switch opens on temperature rise at 200 degrees F and requires a manual reset to restore operation. It is suited for technicians and facility managers who need a safety device that will not automatically reclose after a fault condition.
Switch action and voltage rating
The SPST contact form opens on rise and is rated for 120V AC and 277V AC input voltage. This means the device can interrupt the control circuit on either common supply voltage without additional relays. The manual reset function ensures that a deliberate inspection takes place before the system is re energised.
Mounting and wiring check
Verify that the surface mount base measuring 2 in by 1 5/8 in fits the available space on the appliance. Confirm that the control circuit voltage matches the 120V AC or 277V AC rating and that the wiring can accommodate a SPST switch opening on rise. Ensure the installation complies with local codes for manual reset limit controls.
Highlights
- Manual reset prevents automatic restart after overheating
- Opens at 200°F to cut power when temperature exceeds limit
- SPST contact form provides simple on/off switching
- Rated for 120V AC and 277V AC input voltage
- Surface mount design allows direct installation on equipment
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
How is the manual reset performed after the 200°F limit trips?
After the switch opens at 200°F, allow the unit to cool down and then press the reset button on the controller to restore the circuit.
Will the SPST contacts handle continuous 277V AC loading without overheating?
The controller is rated for 120V AC and 277V AC input; sustained operation stays within those voltage limits.
How hot does the surface-mount base get during all-day operation at 200°F trip point?
The base reaches temperatures near the 200°F opening point before the switch activates, so it becomes very hot during extended use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
