We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red brass tee fitting, three 3/8 inch FNPT ports, hexagonal body

Value Brand

Value Brand Tee Red Brass Coupling 3/8 FNPT x 3/8 FNPT

SKU CH-E3ZV-A7K15

Red brass tee fitting connects three 3/8 inch female NPT pipes, rated for 125 psi and temperatures from -20 to 400 degrees F

  • Rated for potable water per NSF-61 compliance
  • Withstands 125 psi working pressure for reliable service
  • Operates from -20 °F to 400 °F across varied systems
  • Red brass body resists corrosion in plumbing installations
  • Meets ASTM B584 and ASME B16.15 quality standards

Brass Tee for Plumbing Systems

This ZORO SELECT brass tee connects three 3/8 inch female NPT pipes in a T configuration. It suits residential or light-commercial water lines that need a branch connection. The fitting meets ASTM B584 and ASME B16.15 standards for pressure-rated plumbing components.

Threaded Installation Without Soldering

Female NPT threads on all three ports let you screw the tee onto matching male fittings using pipe tape or sealant. No soldering equipment or open flame is required. Over-tightening can distort the brass threads and create leaks, so hand-tight plus one to two turns is the usual practice.

Rated for 125 psi Across a Wide Temperature Range

The Class 125 body withstands 125 psi from -20 to 400 degrees Fahrenheit. ANSI NSF-61 certification through IAPMO confirms suitability for potable water systems. Brass construction resists corrosion better than plain steel in continuous water service.

Highlights

  • Rated for potable water per NSF-61 compliance
  • Withstands 125 psi working pressure for reliable service
  • Operates from -20 °F to 400 °F across varied systems
  • Red brass body resists corrosion in plumbing installations
  • Meets ASTM B584 and ASME B16.15 quality standards

Specifications

BrandZORO SELECT

Questions about this item

How can I confirm the tee is sealing correctly after installation?

Pressurise the line up to 125 psi and check each FNPT joint for leaks; the brass body is rated for -20 to 400 °F so temperature cycling will not compromise the seal.

What comes in the package and what extra parts are needed?

The box contains only the 3/8 in FNPT x 3/8 in FNPT x 3/8 in FNPT tee; pipe-thread sealant or tape and the mating pipe nipples must be supplied separately.

Which pressure class and temperature rating should I select for potable-water use?

This single model meets Class 125 at 125 psi and -20 to 400 °F, and carries ANSI NSF-61 certification for potable water, so no alternative version is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.