Value Brand
Value Brand Tarp 10 x 20 ft 5.1 mil Polyethylene Standard Duty White
Standard-duty polyethylene tarp measuring 10 x 20 ft cut size with heat-sealed seams, aluminum grommets every 36 in, and waterproof, UV, mildew, and tear resistance
- TypeTarps
- White surface reflects sunlight to reduce heat buildup
- 1 mil polyethylene resists tears and UV damage
- Heat-sealed seams and 36 in aluminum grommets secure tie-downs
- Waterproof and mildew-resistant fabric protects gear outdoors
- Finished size 9 ft 4 in x 19 ft 6 in covers large areas
Product identity
This Value Brand polyethylene tarp measures 10 x 20 ft cut size and finishes at 9 ft 4 in by 19 ft 6 in. It is built for standard-duty coverage of equipment, materials or outdoor work areas. The white surface reflects sunlight while the 5.1 mil thickness provides a balance of strength and handling ease.
Setup checks
Verify that the finished dimensions of 9 ft 4 in wide by 19 ft 6 in long suit the area you need to cover. Aluminium grommets are spaced every 36 in along the perimeter for tie-down points. The heat-sealed seams and waterproof construction mean the tarp does not breathe, so condensation can form underneath in humid conditions.
Sustained performance
Flame, mildew, tear and UV resistance are engineered for prolonged outdoor exposure rather than short-term use. The 4.0 oz/sq yd fabric weight holds shape under wind load while remaining light enough for one-person deployment. Standard-duty rating indicates it is not intended for heavy industrial abrasion or sharp-edged loads.
Highlights
- White surface reflects sunlight to reduce heat buildup
- 1 mil polyethylene resists tears and UV damage
- Heat-sealed seams and 36 in aluminum grommets secure tie-downs
- Waterproof and mildew-resistant fabric protects gear outdoors
- Finished size 9 ft 4 in x 19 ft 6 in covers large areas
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Tarps |
Questions about this item
What comes with the tarp and do I need to buy anything else to secure it?
The tarp ships alone with heat-sealed seams and aluminum grommets spaced 36 in apart; rope, bungees or stakes are not included.
How do I decide between the cut size and the finished size when choosing coverage?
Cut size is 10 x 20 ft; finished size is 9 ft 4 in x 19 ft 6 in after hemming — use the finished dimensions for actual coverage planning.
What does the 5.1 mil thickness mean for everyday durability on a job site?
At 5.1 mil and 4.0 oz/sq yd the sheet is rated standard duty — waterproof, tear-resistant, UV-resistant and flame-resistant for general-purpose protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
