We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel pipe nipple with threaded ends, 3 1/2 inches long

Value Brand

Value Brand Steel Pipe Nipple 3/4 in NPT 3 1/2 in

SKU CH-XVGV-ZDNKF

Steel pipe nipple with NPT threads for air, gases, non-potable water and oils at up to 300 psi, 3/4 in nominal size and 3 1/2 in overall length

  • Durable steel construction resists corrosion and wear
  • Handles 300 psi at 150 °F for demanding fluid lines
  • Rated for 150 psi steam at 350 °F in heating systems
  • Electric-resistance welded seam ensures leak-free joints
  • Schedule 40 wall thickness fits standard 3/4 in NPT threads

Steel Pipe Nipple 3/4 in NPT

This steel pipe nipple connects two female-threaded components in air, gas, non-potable water or oil lines. It suits installers who need a short, rigid coupling for Schedule 40 systems. The welded construction handles pressures up to 300 psi at 150 degrees F. It is not for potable water or steam above 150 psi at 350 degrees F.

3 1/2 in Overall Length Capacity

The 3 1/2 in overall length provides a fixed reach between fittings in tight assemblies. It works where a standard close nipple is too short and a longer nipple would interfere with adjacent components. The Schedule 40 wall thickness supports the rated 300 psi operating pressure. It runs out when the installation demands a longer span or a different nominal pipe size.

Black Coated Steel Finish

The black finish identifies the fitting as standard steel for non-corrosive environments. It offers no additional corrosion protection beyond the base metal. The electric resistance weld ensures a consistent joint along the pipe body. California Proposition 65 warnings apply for cancer and reproductive harm. No additional coatings, sealants or accessories are included.

Highlights

  • Durable steel construction resists corrosion and wear
  • Handles 300 psi at 150 °F for demanding fluid lines
  • Rated for 150 psi steam at 350 °F in heating systems
  • Electric-resistance welded seam ensures leak-free joints
  • Schedule 40 wall thickness fits standard 3/4 in NPT threads

Specifications

BrandZORO SELECT

Questions about this item

Will the 3/4 in NPT threads on this steel nipple mate with my existing Schedule 40 fittings?

Yes, it is built to Schedule 40 dimensions with 3/4 in NPT male threads on both ends, so it threads directly into matching Schedule 40 couplings or elbows.

How can I verify the nipple is holding pressure after I install it?

Pressurise the line up to 300 psi at 150 °F or 150 psi steam at 350 °F and check for leaks at the threaded joints; the welded steel body is rated for those limits.

Does the package include any thread sealant or gaskets, or must I buy them separately?

Only the 3 1/2 in black steel nipple is supplied; thread sealant tape or pipe dope for the NPT connections must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.