Value Brand
Value Brand Standard Duty Tarp 19 ft x 29 ft 4 in 5.1 Mil White
Standard-duty polyethylene tarp measuring 19 ft by 29 ft 4 in with heat-sealed seams, aluminum grommets every 36 in, and waterproof, UV-resistant construction
- TypeTarps
- Standard-duty strength covers large areas
- 19 ft by 29 ft 4 in finished size
- Waterproof polyethylene resists moisture and mildew
- UV and flame resistant for outdoor durability
- Aluminium grommets every 36 in for secure tie-downs
19 ft x 29 ft 4 in Coverage
This standard-duty polyethylene tarp provides a finished size of 19 ft by 29 ft 4 in for general-purpose coverage. The white surface reflects sunlight while resisting water, mildew, tears and UV exposure. Aluminium grommets spaced every 36 in allow secure tie-down points across the entire perimeter. Builders, campers and homeowners needing a lightweight, waterproof barrier will find the dimensions practical for equipment, lumber or temporary shelter.
Thermals Noise and Power Draw
The tarp operates passively with no power consumption, fan noise or thermal output. Its 5.1 mil thickness and 4 oz/sq yd fabric weight keep handling light while the heat-sealed seams prevent water ingress. Flame-resistant and mildew-resistant treatments add durability without requiring any energy input. The breathable construction is not present, so moisture does not pass through the material.
Sustained Load Behaviour
Under continuous outdoor exposure the polyethylene resists UV degradation and remains waterproof across the full finished dimensions. Heat-sealed seams and aluminium grommets maintain holding strength when tied down for extended periods. The standard-duty rating suits seasonal use rather than permanent installation. Buyers needing heavier reinforcement or insulated properties should consider a different product class.
Highlights
- Standard-duty strength covers large areas
- 19 ft by 29 ft 4 in finished size
- Waterproof polyethylene resists moisture and mildew
- UV and flame resistant for outdoor durability
- Aluminium grommets every 36 in for secure tie-downs
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Tarps |
Questions about this item
How do I secure the tarp using the aluminum grommets spaced 36 in apart?
Run rope or bungee cords through each aluminum grommet along the perimeter, pulling evenly so tension distributes across all points; the common mistake is fastening only the corners and leaving the mid-span grommets loose, which lets wind flap the material and tear the heat-sealed seams.
What upkeep will the polyethylene tarp need over time?
Rinse off dirt and bird droppings with mild soap and water, then dry fully before folding; inspect the heat-sealed seams and grommet edges each season for cracking or corrosion, and replace the tarp once UV exposure makes the white polyethylene brittle or the waterproof coating fails.
At what point does sustained sun exposure degrade the 5.1 mil polyethylene?
The UV-resistant additive slows breakdown, but continuous direct sunlight will eventually embrittle the 5.1 mil material and weaken the heat-sealed seams; when the fabric feels stiff, shows a chalky surface, or leaks at the seams, the tarp has reached its practical limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
