We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Iron split-ring hanger with electro-galvanized finish, swivel loop, 2.6 in height

Value Brand

Value Brand Split-Ring Hanger 1 5/16 in OD 2.6 in H Iron

SKU CH-S8HN-00AJX

Iron split-ring hanger supports 1 in pipe up to 180 lb with electro-galvanized finish

  • Holds up to 180 lb with cast-iron strength
  • Swivel-loop design simplifies alignment on 3/8 in rod
  • Electro-galvanized finish resists corrosion in damp areas
  • Compact 2.6 in height fits tight overhead spaces
  • Sized for 1 in pipe with 1 5/16 in maximum OD

1 5/16 in Split-Ring Hanger for 1 in Pipe

The Value Brand split-ring hanger supports pipe with a maximum outside diameter of 1 5/16 in and suits a nominal 1 in pipe size. It is built from iron with an electro-galvanized finish for corrosion resistance. The swivel loop design accommodates 3/8 in threaded rod for overhead suspension. Load capacity is rated at 180 lb.

Check Rod Size and Pipe Diameter Before Ordering

Verify that your existing threaded rod matches the 3/8 in size required by the swivel loop. Confirm the pipe outer diameter does not exceed 1 5/16 in to ensure a secure fit. The hanger width is 1.9 in and overall height is 2.6 in, so allow adequate clearance in the installation area. This item is not cushioned and includes no insulation.

Iron Construction Handles 180 lb Static Load

The cast iron body and steel bolt provide rigid support for stationary pipe runs under normal conditions. Electro-galvanized surfaces resist moisture without additional coatings. No moving rollers or cushions are present, so vibration damping relies on the mounting structure. The hanger weighs 16 oz and measures 22FP59 per the manufacturer reference.

Highlights

  • Holds up to 180 lb with cast-iron strength
  • Swivel-loop design simplifies alignment on 3/8 in rod
  • Electro-galvanized finish resists corrosion in damp areas
  • Compact 2.6 in height fits tight overhead spaces
  • Sized for 1 in pipe with 1 5/16 in maximum OD

Specifications

BrandZORO SELECT

Questions about this item

Does the hanger include the threaded rod or any fasteners for mounting?

The hanger itself is supplied; a 3/8 in threaded rod and mounting hardware are not included and must be purchased separately.

When should I choose this 1 5/16 in OD model instead of a different size?

Select this model when the pipe outside diameter is up to 1 5/16 in and the pipe size is 1 in; the hanger is sized for that specific OD.

What does the 180 lb load capacity mean for an installed hanger?

It is the maximum static weight the iron hanger can support when properly attached to a 3/8 in threaded rod.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.