We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass hydraulic hose fitting, straight 1/4 NPT male thread, H59 grade brass finish

Value Brand

Value Brand SPEEDAIRE 2X769 Hydraulic Hose Fitting Brass 1/4 NPT

SKU CH-YM7M-QS9B3

A brass hose-barb-to-NPT fitting rated to 250 psi at 70°F for reusable hydraulic connections

  • H59 grade brass resists corrosion for durable hydraulic connections
  • Straight shape provides direct flow path between system components
  • 250 psi at 70°F handles demanding hydraulic pressure requirements
  • Hose barb x NPT connection fits 1/4 in ID hose securely
  • Reusable design allows disconnection and reinstallation in different systems

Brass hydraulic hose fitting

The SPEEDAIRE 2X769 is a straight brass fitting that joins a 1/4 inch inner diameter hose to a 1/4 inch male NPT port. H59 grade brass provides corrosion resistance and mechanical strength for industrial hydraulic circuits. The hose barb by NPT connection suits maintenance crews and plant engineers who need a reliable, reusable joint.

Sustained pressure performance

Rated for 250 psi maximum operating pressure at 70 degrees Fahrenheit, the fitting maintains its seal during continuous system operation. The straight through bore minimises flow restriction and pressure drop across the connection. Brass construction resists vibration loosening better than softer alloys in long duty cycles.

Upgrade from worn or mismatched fittings

Replaces damaged, corroded or incorrectly threaded hose ends that leak under load. The reusable design allows reinstallation when reconfiguring hydraulic lines without buying new fittings each time. Not suited for systems exceeding the 250 psi rating or requiring angled routing.

Highlights

  • H59 grade brass resists corrosion for durable hydraulic connections
  • Straight shape provides direct flow path between system components
  • 250 psi at 70°F handles demanding hydraulic pressure requirements
  • Hose barb x NPT connection fits 1/4 in ID hose securely
  • Reusable design allows disconnection and reinstallation in different systems

Specifications

BrandSPEEDAIRE

Questions about this item

How much heat does the SPEEDAIRE 2X769 brass fitting generate when hydraulic fluid runs through it all day?

The brass fitting itself produces no heat; fluid temperature stays at the system level, with a maximum operating pressure of 250 psi at 70°F.

What hose and thread must I already have to install the SPEEDAIRE 2X769 fitting?

You need a hose with a 1/4 in inner diameter and 5/8 in outer diameter, plus a 1/4 NPT female port for the male NPT end.

Will the SPEEDAIRE 2X769 fitting seal reliably on older steel ports that have minor thread wear?

The H59 grade brass male NPT threads conform to standard taper specs, so they seal on compatible 1/4 NPT ports even with light wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.