Value Brand
Value Brand Snap Action Switch DPDT 20 A 240 V Hinge Roller Lever Actuator 1.39 in
Snap-action switch with a 1.39 in hinge roller lever, DPDT contacts rated 20 A at 240 V and 1/4 in quick-connect terminals
- DPDT switching handles two circuits with 20 A 240 V rating
- Hinge roller lever extends 1.39 in for reliable actuation
- Quick-connect terminals accept 1/4 in connectors for fast wiring
- Compact body fits 1.00 in mounting centers in tight spaces
- California Prop 65 warning notes chemical risk for informed handling
Zoro Select DPDT Snap-Action Switch
This Zoro Select snap-action switch uses a hinge roller lever actuator and a double-pole double-throw contact form. It is rated for 20 A at 240 V AC and terminates in 1/4 in quick-connect terminals. The actuator lever measures 1.39 in long and mounts on 1.00 in centres.
Suits machinery limit and safety circuits
The switch fits applications that need a hinged roller lever for cam or slide actuation and a DPDT circuit arrangement. Builders who require a different actuator style, a single-pole contact form, or a lower current rating should consider other switch types.
20 A 240 V AC rating decides suitability
The 20 A at 240 V AC rating is the primary specification that determines whether this switch can handle the intended load. Verify that the circuit voltage and current stay within this limit before installation.
Highlights
- DPDT switching handles two circuits with 20 A 240 V rating
- Hinge roller lever extends 1.39 in for reliable actuation
- Quick-connect terminals accept 1/4 in connectors for fast wiring
- Compact body fits 1.00 in mounting centers in tight spaces
- California Prop 65 warning notes chemical risk for informed handling
Specifications
| Brand | Zoro Select |
|---|
Questions about this item
Will the 1/4 in quick-connect terminals mate with the spade connectors already on my older control panel?
The switch uses 1/4 in quick-connect terminals, the standard size for most legacy panel wiring, so existing spade lugs should fit directly without adapters.
How can I confirm the DPDT contacts are switching cleanly at the rated 20 A 240 V after installation?
With power off, use a multimeter on continuity across each pole while actuating the hinge roller lever; both circuits should toggle sharply with no intermediate resistance.
Does the switch ship with mounting screws or a wiring harness, or must I supply them?
Only the switch body with its 1.39 in hinge roller lever is included; mounting hardware and any wiring leads must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
