We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS sanitary street tee, hub-spigot-hub form

Value Brand

Value Brand Sanitary Street Tee Coupling 1-1/2 in Hub x Spigot x Hub ABS

SKU CH-4PYE-XB3YX

ABS sanitary street tee connects three pipes in a T layout with hub, spigot and hub ends for 1-1/2 inch pipe

  • ABS construction resists corrosion and impact
  • Hub x spigot x hub connects three pipe sections
  • Street tee shape directs flow in drainage systems
  • Meets ASTM D3965 cell class 32222 for quality assurance
  • Withstands temperatures from -40 to 180 degrees F

Product Identity

The Value Brand Sanitary Street Tee is an ABS pipe fitting designed for DWV plumbing systems. It connects a 1-1/2 inch hub, spigot and hub in a tee configuration. It suits installers working on residential or commercial drain, waste and vent layouts. The fitting meets ASTM D3965 cell class 32222 for material quality.

Build and Connections

The hub by spigot by hub arrangement lets the spigot end insert directly into a hub fitting while the two hub ends accept pipe. This reduces the number of separate couplings needed during assembly. ABS construction resists corrosion and chemical attack from typical wastewater. The material is rated for continuous service between minus 40 degrees and 180 degrees Fahrenheit.

Thermal and Operational Limits

The fitting handles the temperature range found in standard sanitary drainage without softening or cracking. No external power or moving parts are involved so noise and power draw are not applicable. The ABS material maintains structural integrity across the specified thermal envelope. Installation follows normal solvent cement procedures for ABS piping.

Highlights

  • ABS construction resists corrosion and impact
  • Hub x spigot x hub connects three pipe sections
  • Street tee shape directs flow in drainage systems
  • Meets ASTM D3965 cell class 32222 for quality assurance
  • Withstands temperatures from -40 to 180 degrees F

Specifications

BrandCHARLOTTE PIPE AND FOUNDRY CO.

Questions about this item

What ASTM standard does the 32222 cell-class ABS meet for drain-waste-vent use?

The fitting complies with ASTM D3965, which defines the 32222 cell classification for ABS DWV fittings.

How much clearance does the 1-1/2 in hub-spigot-hub layout need inside a stud wall?

The street-tee shape puts one hub on a short spigot, so you need room for the spigot length plus hub depth on each connected pipe.

Which joint do I solvent-weld first so the tee does not twist out of alignment?

Cement the two straight hubs to the main run first, hold until set, then attach the branch hub on the spigot last.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.