Value Brand
Value Brand Repair Clamp 1 7/8 in OD Partial Coverage 6 in L
Stainless steel repair clamp with nitrile rubber gasket fits 1 7/8 in outside diameter pipe and handles 150 psi pressure
- Stainless 304 steel resists corrosion
- Nitrile gasket seals up to 150 psi
- Two-bolt design simplifies installation
- Partial coverage fits 1 7/8 in OD pipe
- Zoro Select brand ensures consistent quality
Repair Clamp for 1 7/8 in Outside Diameter
This stainless steel repair clamp fits pipe with a maximum outside diameter of 1 7/8 in and a nominal pipe size of 1 1/2 in. It provides a partial coverage seal using a nitrile rubber gasket rated for 150 psi operating pressure. The clamp suits maintenance crews and facility managers fixing leaks on compatible metal or plastic lines.
Two-Bolt Installation with Grade 304 Hardware
Installation requires tightening two steel bolts to compress the gasket against the pipe surface. The Grade 304 stainless band resists corrosion, but uneven torque can leave a leak path on the uncovered section. Clean the pipe thoroughly and align the gasket over the defect before securing the bolts in alternating increments.
Verify Diameter and Pressure Before Ordering
Confirm the pipe outside diameter matches exactly 1 7/8 in, as the clamp covers only a partial circumference and cannot bridge a size mismatch. Ensure the system pressure does not exceed 150 psi and that the nitrile gasket is compatible with the conveyed fluid. The clamp is not designed for vacuum service above the rated limit.
Highlights
- Stainless 304 steel resists corrosion
- Nitrile gasket seals up to 150 psi
- Two-bolt design simplifies installation
- Partial coverage fits 1 7/8 in OD pipe
- Zoro Select brand ensures consistent quality
Specifications
| Brand | Zoro Select |
|---|
Questions about this item
How can I verify the clamp is sealing correctly after installation?
Pressurise the line up to 150 psi and check for leaks around the nitrile rubber gasket; the two steel bolts should hold the 304 stainless band firmly on the 1 7/8 in outside diameter pipe.
What components come with the clamp and what must I supply?
The clamp includes the 304 stainless steel band, nitrile rubber gasket and two steel bolts; you must provide the 1 1/2 in pipe and any tools needed to tighten the bolts.
Which size clamp matches my 1 1/2 in pipe with a 1 7/8 in outside diameter?
Choose the 6 in long partial-coverage model rated for a maximum outside diameter of 1 7/8 in and a maximum operating pressure of 150 psi.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



