We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red brass reducing tee with three female NPT ports

Value Brand

Value Brand Reducing Tee Red Brass 3/4 in Female NPT 1/2 in Female NPT Class 125 200 psi

SKU CH-Y7F0-E0AHV

A red-brass reducing tee joins 3/4 in and 1/2 in female NPT branches at 200 psi Class 125

  • TypeOther
  • Red-brass construction resists corrosion for long service life
  • Class 125 rating handles 200 psi working pressure
  • Reducing tee joins 3/4 in and 1/2 in female NPT lines
  • New condition ensures clean, undamaged threads on arrival
  • Prop 65 notice informs safe handling and compliance needs

Red Brass Reducing Tee

This reducing tee is a brass plumbing fitting rated for Class 125 service. It connects three female NPT threads in a tee configuration for water or gas distribution. The fitting suits residential and light commercial pipework requiring a durable, corrosion-resistant branch connection.

Pressure and Temperature Limits

The fitting withstands a maximum operating pressure of 200 psi at Class 125 rating. Brass construction handles typical hot and cold water temperatures without deformation. No electrical power or active cooling is involved so noise and thermal output are not applicable.

Thread Sizes and Installation

The tee provides one 3/4 inch female NPT inlet, one 3/4 inch female NPT outlet and a 1/2 inch female NPT branch. All connections use standard taper threads for sealing with tape or paste. The red brass alloy resists dezincification in aggressive water conditions. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • Red-brass construction resists corrosion for long service life
  • Class 125 rating handles 200 psi working pressure
  • Reducing tee joins 3/4 in and 1/2 in female NPT lines
  • New condition ensures clean, undamaged threads on arrival
  • Prop 65 notice informs safe handling and compliance needs

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How do I install this reducing tee and what threading mistake should I avoid?

Thread the 3/4 in Female NPT and 1/2 in Female NPT connections with pipe sealant on clean threads; the common error is cross-threading the NPT taper, which leaks at Class 125 pressure ratings.

What maintenance or replacement will this brass tee need over time?

Inspect for dezincification or mineral buildup annually; replace the tee if threads show corrosion or if pressure tests exceed the 200 psi maximum operating limit.

What pressure limit appears first during sustained use of this Class 125 fitting?

The 200 psi maximum operating pressure is the first limit reached under sustained loads; exceeding it risks joint failure on the 3/4 in and 1/2 in Female NPT ports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.