Value Brand Reducing Sanitary Tee 2 x 1-1/2 x 2 in

Reducing Sanitary Tee for ABS pipe systems

This Value Brand reducing sanitary tee connects three ABS pipe sections in a hub-by-hub-by-hub arrangement. The fitting reduces from a 2-inch run to a 1-1/2-inch branch while maintaining a 2-inch outlet. It is intended for drain, waste and vent installations where a branch line joins a main stack.

Schedule 40 rating and temperature headroom

The tee meets ASTM D3965 cell class 32222 and carries a Schedule 40 pressure class for standard residential and light-commercial drainage. Its listed service range spans -40 °F to 180 °F, so it handles cold-weather exposure and hot wastewater discharge without softening or cracking. The fitting is not rated for pressure piping or continuous temperatures above the stated maximum.

Hub connections simplify solvent-weld assembly

All three ports use a hub connection, allowing direct solvent-cement joining to compatible ABS pipe without additional couplings or adapters. The reducing geometry is moulded into the fitting body, so no separate reducer bushings are required. No gaskets, clamps or mechanical fasteners are included or needed for standard installation.