We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PPR 25mm elbow fitting with smooth finish

ifan

ifan White PPR Fitting 25mm Elbow PN25

SKU CH-45JH-NXXM2

White PPR elbow joins 25 mm pipe for hot and cold water systems rated to PN25 and 75 °C

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • PPR material resists corrosion in hot and cold water systems
  • Withstands temperatures up to 75°C for reliable hot water use
  • Heat-fusion welding creates seamless leak-proof joints
  • Smooth interior surface maintains constant unobstructed flow
  • Durable construction ensures long service life under pressure PN25

25 mm PPR Elbow Fitting

This white PPR elbow fitting connects 25 mm water tubes in plumbing systems using heat-fusion welding. Rated to PN25 pressure class, it handles both hot and cold water circuits within a 0-75°C range. The corrosion-resistant PPR body ensures long service life in residential or commercial installations. ISO certification confirms compliance with recognised quality standards.

Check tube size and joint method

Verify that your existing pipework uses 25 mm outer-diameter PPR tubing before ordering. The fitting requires heat-fusion equipment for socket or butt welding; threaded or compression tools will not create a seal. Ensure the system design stays within the PN25 pressure rating and the stated temperature limits. No additional sealants or gaskets are needed when the fusion joint is made correctly.

Sustained pressure and temperature performance

Under continuous operation the PPR material resists creep at the full PN25 rating up to 75°C. The smooth interior surface maintains consistent flow without scaling or corrosion buildup over years of service. UV resistance preserves structural integrity in exposed runs. Heat-fused joints remain leak-proof through thermal cycling, eliminating the retightening required with mechanical couplings.

Highlights

  • PPR material resists corrosion in hot and cold water systems
  • Withstands temperatures up to 75°C for reliable hot water use
  • Heat-fusion welding creates seamless leak-proof joints
  • Smooth interior surface maintains constant unobstructed flow
  • Durable construction ensures long service life under pressure PN25

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

Does the 25mm PPR elbow arrive as a single fitting or in a multi-piece carton?

The item count is listed as one carton, so the elbow is supplied in a single package.

Which PN rating should I select for a hot-water circuit that peaks at 75°C?

The PN25 rating covers the full 0–75°C range, making this elbow suitable for that temperature.

What does the PN25 marking mean once the elbow is fused into a PPR pipe run?

PN25 indicates the joint is designed to handle up to 25 bar of working pressure after proper heat-fusion installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.